Setting Up The Handset For Use - Siemens Gigaset S810A User Manual

First steps

Setting up the handset for use

The display and keypad are protected by plastic films.
Remove the protective films!
Inserting the batteries and closing the battery cover
Warning
Use only rechargeable batteries recommended by Gigaset Communications
GmbH (
as this could result in significant health risks and personal injury. For example,
the outer casing of the batteries could be damaged or the batteries could
explode. The phone could also malfunction or be damaged as a result of using
batteries that are not of the recommended type.
¤
Insert the batteries with
the polarity in the cor-
rect direction.
The polarity is indicated
in/on the battery com-
partment.
To open the battery cover, for
instance to replace the batter-
ies, insert a coin into the cavity
on the left-hand side of the cas-
ing, then pull the battery cover
in an upward direction.
14
¢
page 84), i.e., Never use conventional (non-rechargeable) batteries,
¤
First insert the battery
cover at the top a.
¤
Then press the cover
until it clicks into place.
b