Setting Pauses; Temporarily Switching To Tone Dialling (Dtmf) - Siemens GIGASET C595 Manual

Setting pauses

Changing the pause after line seizure
You can change the length of the pause
that is inserted between pressing the talk
key c and sending the number.
v
Open the main menu.
*#Q5# L
Press keys.
~
Enter digit for the pause
length (1 = 1 sec.; 2 = 3 sec.;
3 = 7 sec.) and press
Change pause after recall key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
v
Open the main menu.
*#Q5# 2
Press keys.
~
Enter a digit for the length of
the pause (1 = 800 ms;
2 = 1600 ms; 3 = 3200 ms)
and press
Changing a dialling pause (pause after
access code)
Precondition: You have saved an access
¢
code ( page 68).
v
Open the main menu.
*#Q5#
Press keys.
~
Enter number for the length of
the pause (1 = 1 sec.;
2 = 2 sec.; 3 = 3 sec.;
4 = 6 sec.) and press
To insert a dialling pause: press and hold
S for 2 seconds. A P appears in the dis-
play.
.
§OK§
.
§OK§
.
§OK§
Connecting the base to the PABX
Temporarily switching to tone
dialling (DTMF)
If your PABX still operates with dial pulsing
(DP), but you need tone dialling for a con-
nection (e.g. to listen to the network mail-
box) you must switch to tone dialling for
the call.
Precondition: You are conducting a call or
have already dialled an external number.
*
Press the star key.
After the call is ended, dial pulsing is auto-
matically activated again.
69