Toshiba RAV-SM561CT-E Service Manual page 45

9. How to change the program operation time
1. Push button in the normal display
PROGRAM
status.
2. Select the required day reserve mark
by pushing button.
DAY
3. Push button.
SET
SuMoTuWeTh Fr Sa
PROGRAM1
ERROR
PROGRAM2
PROGRAM3
9
WEEKLY TIMER
PROGRAM DAY SET CANCEL
HH MM
CLEAR CHECK
11
10
10. How to clear the program operation
• Clear of the day of the week
1) Push button.
PROGRAM
2) Push button and select the
DAY
reserve mark to be cancelled.
3) Push button. The program time
CLEAR
disappears.
4) Push button. The operation
PROGRAM
reserve indication disappears.
• Clear of a part of the program
1) Push button.
PROGRAM
2) Push button and select the
DAY
reserve mark on a to be cancelled.
3) Push button.
SET
4) Push button again to flash ON
SET
or OFF time of the program to be
cancelled.
5) Push button.
CLEAR
Then, a part of the program has been
cancelled. At the same time, the
remained programs are automatically
arranged.
6) Push button.
PROGRAM
4. Each push button, the flashing
SET
part changes in the following figure. Put
the indication on the time to be changed.
5. Using / buttons, change the time.
HH MM
6. Push button.
SET
7. Push button. Then the change
PROGRAM
operation has completed.
SuMoTuWeTh Fr Sa
PROGRAM1
ERROR
PROGRAM2
PROGRAM3
11. How to set up the holiday
• The operation reserve day can be
cancelled by setting up the holiday.
1) Push button. The holiday setup
CANCEL
mark flashes.
2) Push button and select the
DAY
holiday setup mark on the day
which the holiday is set.
3) Push button. The flashing
SET
holiday setup indication changes
on. ( )
• Clearance of [HOLIDAY] setup
1) Push button.
CANCEL
2) Push button and select the
DAY
holiday setup mark on the day to
which the holiday is cancelled.
3) Push button. The holiday setup
SET
mark disappears and the operation
reserve mark appears.
• Explanation of operation
The cancel setting day is temporarily
canceled, and from the next day, the
cancel setup mark disappears and the
operation reserve mark appears.
CAUTION
• For the day which does not set timer, the
cancellation cannot be set.
12. Matters to be memorized
1. Power failure
When a power failure occurred and the power supply
has been reset, the display of the right figure appears.
:
(A colon " " flashes.)
• Resuming of operation
1) Turn on the power (breaker) of the air condi-
tioner.
2) Start operation by the remote controller.
3) Push button of the program weekly timer.
PROGRAM
:
The flashing colon " " changes to the clock
display in the normal status. In this case, the
program is memorized by the backup function.
Therefore, it is unnecessary to set the program
again.
2. Operation of program weekly timer and air conditioner
An air conditioner mounted with a program weekly timer is operated on a remote
controller and on the program weekly timer.
(Example) 1) Operation pattern in a day
SuMoTuWeTh Fr Sa
Program timer
PROGRAM1
ON/OFF setup
ERROR
PROGRAM2
Remote controller
PROGRAM3
operation
Start/Stop button
ON :
Air conditioner
operation
OFF :
2) Operation pattern in a week
SuMoTuWeTh Fr Sa
PROGRAM1
ERROR
PROGRAM2
PROGRAM3
WEEKLY TIMER
PROGRAM DAY SET CANCEL
HH MM CLEAR CHECK
8:00 12:00 12:40 16:50 17:00 19:00
ON OFF ON OFF ON OFF
Push Push Push Push
SuMo TuWeTh Fr Sa
Timer operation
No timer operation No timer operation
(No reserve) (Reservation is canceled as holiday)