Network Setup; Manual Setup; Connect To Adsl By Pppoe Mode - Veo Observer Plus User Manual

8-5.Network Setup

8-4-1. Manual Setup (LAN)
For fixed IP address users:
On the network environment, the administrator can assign a unique IP address to
each Observer Plus. The procedures are as follow:
 Check the "Manually" button.
 Enter the "IP Address", "Network Mask (Subnet mask)", "Default gateway", and
the "DNS1","DNS2", as well as 'DNS3" in formations.
 Select "Reboot immediately" to reboot the Observer Plus to allow these settings
to take effect.
 DHCP
The "DHCP" is automatically set as the default network setting of Observer Plus.
When an Observer Plus is connected into the LAN, it will issue the DHCP packets to
request an IP address that is dynamically assigned by the DHCP server. If it is
unable to get a DHCP address on a limited tries, the Observer Plus will assign a
default IP address such as "169.254.xx.xx".

8-4-2. Connect to ADSL by PPPoE Mode

The Observer Plus can directly connect to the ADSL. However, it should be setup on
the LAN environment to setup the PPPoE information before connecting to the ADSL
modem. Power on the Observer Plus and it will dial in to the ISP connection to the
WAN via the ADSL modem.
The procedures are as follow:

Connect to the LAN by DHCP or Fixed IP

Access the Observer Plus and enter [Configuration]  [Network Setup]

 PPPoE Configuration

select the "Dial on power Up" check box.

If the ADSL Modem and Observer Plus are connected on a hub and after the
PPPoE Information's are entered, you can then select the " Save and Dial Now"
option to do the PPPoE dial.

Enter the "User" and "Password" fields with the account and password provided
by the ISP.
- 27 Veo Europe_VIPN-2xxx Observer Plus_UserManual rev1.0 EN