Delete User; Motion Detect Setup; Motion Detection Enable / Disable; Motion Detected Mail Function - Veo Observer Plus User Manual

If the check box is not checked, then the user check will not be enabled. All users
can access the Observer Plus directly, with the administrator's permission. A Login
window is not required.
Note: Before you select Enable user check "Yes" button, please remember to
change the administrator password.
Add a user or change password:
Enter a new user name and password information to
create a new user account, or enter an existing user
account, then set a new password to replace the old
password.
Confirm by clicking on the [Set/Change] button to
create the account or change password.
After submitting, the "Current User List:" would display the newly created user
account. In this example: "newuser".

8-2-2. Delete User

Select the user account from the "Username" list box.
Click the [Delete] button to delete the selected user account. A confirmation
window will prompt the user to select "OK" or "Cancel".
After selecting the "OK" button, the selected user account will be deleted from the
"Current User List". In this example, the "newusername" account will be removed.

8-3. Motion Detect Setup

8-3-1. Motion Detect Enable / Disable
Check the "Enable motion detection" check box to
activate the motion detection.
If the check box is not checked, the motion detection send mail function will not be
enabled.
Enter the " Sensitivity " button for select "High" or "Middle " and "Low " mode .
8-3-2. Motion detected mail function (Mail Setting)
- 22 Veo Europe_VIPN-2xxx Observer Plus_UserManual rev1.0 EN