Motion Detected Mail - Veo Observer Plus User Manual

When motion detection is enabled, the user can setup the mail function to send the
motion-detected images to the preset mail address. The procedures are as follow:
 Motion Detect set to "Enable" state.
 Setup the "SMTP Mail Server" and E-Mail address.
(Password use or not)
 Enter the sender's email address in "Sender" field
and the recipient's email address in the "Receiver"
field.
 The user can change the "Subject" field.
 If the mail server needs authentication, check the
"Password" check box. Also, enter the password;
otherwise the "Password" field does not need to
be filled in.
 Check the "Send mail when motion detected" check box to enable the operation.
If the check box is not checked, the motion detected send mail function will not
be enabled.
 Confirm by selecting [Save Settings] option to save the settings.
Note:
If all of the items are enabled resulting in a motion event detection, the Observer
Plus will send the motion-detected images to the preset email address. The
maximum number of images allowed is 6 images per mail.

8-3-3. Motion detected mail

The received mail will be displayed in a motion picture
form.
- 23 Veo Europe_VIPN-2xxx Observer Plus_UserManual rev1.0 EN