8-3-4. Motion detected message on the main window.
When the motion detection function is enabled, and a motion detected, a message
will be displayed at the bottom.
8-3-5. FTP uploads when motion detected.
The motion-detected images can also be uploaded to FTP server. The procedures
are as follow:
Enter the IP address or domain name of the "FTP Server".
Enter the "Username" and "Password" of the FTP server.
Certain FTP servers need an "Account" field. Leave it blank if it is not needed.
Enter the "Remote folder" upload path information for saving the images.
Confirm by selecting the [Save Settings] option to save the settings.
8-3-6.Alert OUT Setup
When the Alert OUT function is enabled ,
and a motion detected, a message will be
send to Mail or Ftp site by manual setting
Enable
GPIO OUT
GPIO IN GND VCC
Note. About GPIO function, we only provides a set to be possible to use
Please check the image what GPIO IN/OUT may use.
- 24
Veo Europe_VIPN-2xxx Observer Plus_UserManual rev1.0 EN