6-2. Resolution Setting
Observer Plus provides 5 resolutions
640 X 480
320 X 240
352 X 288
176 X 144
160 X 120
User can select the desired new setting from the "Resolution" list box.
Note: The value in the list box displays the current setting of the current image.
When you make a new selection, the value on the list box will be changed to the
new image quality settings.
6-3. Frequency Setting
Observer Plus provides the Frequency setting for
Outdoor
Indoor & 50 (For PAL system)
Indoor & 60 (For NTSC system)
6-4. Camera Advanced Adjust
Observer Plus provides the advanced setting for
Saturation
Hue
Sharpness
To control the camera, use the "+" to increase, "-" to decrease it, or "STD" to
return to default value.
6-5.Operation Mode
Continuous Mode:
The Observer Plus will always try to capture the image
as fast as possible. This is the default setting.
Periodic Mode:
MS (mill-second) or s (second) can be set. The value set must be greater than 0.
Setting the periodic mode to 5 seconds will update the image every 5 seconds. The
time interval can be checked by the time displayed on the image.
- 17
Veo Europe_VIPN-2xxx Observer Plus_UserManual rev1.0 EN