Smeg Built-in oven Use & Installation Manual page 12

ENGLISH
Use & Installation Manual
To remove oven rack from the oven:
1. Pull rack forward
2. Lift rack up at front and then remove it
To replace an oven rack:
1. Place rear of rack between rack level
guides
2. While lifting front of rack, slide rack in all
the way while lowering the front
Oven Extendable Racks
• The extendable rack allows for easier access
to cooking foods. It extends beyond the
standard flat rack bringing he food closer to
the user.
CAUTION
When the rack is outside of the oven, slide
arms do not lock. They could unexpectedly
extend if the rack is carried incorrectly.
Extending slide arms could cause injury.
Rack should only be held or carried by
grasping the sides.
NOTE: Always remove the extendable rack
before self-cleaning the oven.
To avoid burns, pull rack all the way out and
lift pan above handle when transferring food
to and from oven.
12
To remove extendable rack from the oven:
1. Lift of rack slightly and push it until the
stop release
2. Raise back of rack until frame and stop
clear rack guide
3. Pull rack down and out
To replace an extendable rack:
1. Grasp rack firmly on both sides. Place
rack (including frame) above desired rack
guide
2. Push all the way in until the back of the
rack drops into place
3. Pull both sections forward until stops
activates. Rack should be straight and
flat, not crooked
12
Use & Installation Manual