Power Function - Zanussi ZKT 650 D Instruction Book

Power function

The Power function enables you to increase the out-
put of the two front cooking zones for 10 minutes.
With this function, you can, for example, bring a
large quantity of water rapidly to the boil or brown
meat very well.
Activating the Power function: After you have
selected one of the two front zones, directly press
the key is displayed.
If "H" should be displayed before the function "P"
0.
can be activated, press the key + or - so that or a
heating power setting is displayed, and press the key
P
.
After 10 minutes, the power is automatically
P
switched back to the stage "9" is no longer dis-
played.
The Power function can be interrupted as follows:
• Press the key "P".
• Press the key - .
This power increase with the Power function is only
possible because part of the output is diverted to the
other cooking zones at the back. As soon as the
power function of the front right cooking zone is acti-
vated, a maximum of the heating power stage can
be obtained for the rear left cooking zone. As soon
as the power function of the front left cooking zone is
activated, a maximum of the heating power stage
can be obtained for the rear right cooking zone. In
this case, although the stage "9" can be set for both
rear cooking zones, the display jumps back to "8" or
"7" and flashes. After the end of the Power function,
the rear cooking zones switch back to the stage "9"
if this was previously selected.
11