Search Method - One for All Audio Zapper User Manual & Code Book

Search Method

If your Audio System does not respond to the AUDIO
ZAPPER after trying all the codes listed for your
brand, try searching for your code. You may also try
the Search Method when your brand is not listed at
all. To search for your Amplifier/Tuner code:
1 Turn on your Amplifier/Tuner.
Press the TUN key on the AUDIO
2
TUN
ZAPPER.
Then, press and hold the MAGIC
3
MAGIC
key until the LED blinks twice (the
LED will blink once then twice).
Next, press the Programme - key
4
three times.
Next, alternate between TUN and
5
TUN
POWER until your Amplifier/Tuner
turns off. You may have to press
these keys many times, so be
patient. Remember, you must aim
the AUDIO ZAPPER at your device
the entire time you are searching
for your code.
When your device turns off, press
6
MAGIC
and release MAGIC.
The AUDIO ZAPPER should now be ready to
operate your device. Turn your device back on
manually and try all the remote's functions to
ensure they are working properly. If some of the
AUDIO ZAPPER'S commands are not operating
correctly, you can lock the keys that do function
correctly (see page 10), then try the search method
again. In this method you should alternate
between TUN and the key that is not functioning
correctly in order to find the correct code for that
function.
For example, the search may reveal a code that
controls the Power and the Volume, but not the
stations of your Tuner. You would then manually
place your Amplifier in the Tuner mode, then
alternate between TUN and Programme+ during
the second search.
12
WWW.ONEFORALL.COM