Search Method - One for All URC-8350 Instruction Manual

--> If your device does not respond to the URC-8350 after you have tried all
the codes listed for your brand.
--> If your brand is not listed at all.
The Search Method allows you to scan through all the codes contained
in the memory of the URC-8350.
Example: To search for your TV code (on the TV key):
1. Switch ON your television (not on standby) and aim your URC-8350
at your TV.
2.
3.
4.
5.
6.
7.
8.
(*) to scan through other device types:
Press:
- Most TV's do not switch on pressing the POWER key. Please try pressing a
"number" key or the "TV-text off" key to switch your TV back on.
- If you cannot control your Television properly, please continue the Search
Method, you may be using the wrong Code.
- To search for the code for another device follow the instructions above only
press the appropriate device key instead of TV during step 2 and the
appropriate number during step 5.
6
Setting up the URC 8350

Search Method

Press and release the TV key.
Press and hold down REWIND + FASTFORWARD
simultaneously until the URC-8350's LED (red light)
blinks twice (the LED will blink once and then twice).
Press 9 9 1. The LED will blink twice.
Press 1 to scan through all TV codes. *
Next, press POWER.
Aim the URC-8350 at your Television. Now press UP over
and over, until your Television turns off (every time you
press the UP key theURC-8350 will send out a POWER
signal from the next code containedin the memory).
You may have to press this key many times (up to 150
times) so please be patient. If you skip past a code, you
can go to the previous code(s) by pressing the DOWN key.
Remember to keep pointing the URC-8350 at your
Television while pressing this key.
As soon as your television turns off, press OK to store the
code.
to scan through codes for:
Television / LCD / Plasma
DVD player/recorder or PVR
Amplifier or Amp./Tuner or CD Player or Miscellaneous
Set-Top-Box or Satellite Receiver or Cable Converter
WWW.ONEFORALL.COM