Your manual is divided into two parts: set-up instructions and device codes. You may need this guide again in the future, so please be sure to keep it. Your ONE FOR ALL 4 needs 2 new “AA/LR6” alkaline batteries. Your ONE FOR ALL 4 can operate four devices: : Television...
Installing the Batteries Your ONE FOR ALL 4 needs 2 new “AA/LR6” alkaline batteries. Remove the battery cover from the back of your ONE FOR ALL 4 by pressing down on the tab. Match the batteries to the + and - marks inside the battery case, then insert the batteries.
Page 5
Fastext functions of your television. If on your original remote control these keys are used for Menu navigation, the ONE FOR ALL Fastext keys may operate in the same way.
The most popular code is listed first. Make sure your device is switched on (not on standby). Press the TV key on the ONE FOR ALL 4 for the device you wish to Set-Up. Press and hold the MAGIC key until the POWER key (LED) blinks twice (the red light (LED) underneath the POWER key will blink once then twice).
The Search Method If your device does not respond to the ONE FOR ALL 4 after you have tried all the codes listed for your brand, try searching for your code. The Search Method allows you to find the code for your device by scanning through all the codes contained in the memory of the ONE FOR ALL 4.
It is possible to change the mode of any device key. This is useful if you want to set up two of the same devices on the ONE FOR ALL 4. The code can be set up using “Direct code set up” (p. 6) or “Search method” (p. 7).
(a TV function) without pressing the TV mode key on your ONE FOR ALL 4. To punch through to TV volume while in the VCR, DVD or SAT mode: To cancel the “Volume Punch Through”...
Problem & Solution Problem: Your brand is not listed in the code section? The ONE FOR ALL does not operate your device(s)? The ONE FOR ALL is not performing commands properly? Problems changing channels? Video not recording? The ONE FOR ALL does...