Setting The Clock - Sharp R-230AM Operation Manual With Cookbook

SETTING THE CLOCK

There are two setting modes: 12 hour clock and 24
hour clock
1. To set the 12 hour clock, hold the POWER LEVEL
button down for 3 seconds.
will appear in the display.
2. To set the 24 hour clock, touch the POWER LEVEL
button once more after Step 1, in the example
below will appear in the display.
Then when setting the time for 12 or 24 hour clock, follow the example below.
Example:
To set the 24 hour clock to 23:35
Choose the clock function.
(12 hour clock).
Power Level
x1 for 3 secs.
Set the minutes (35).
Time/Weight
NOTE:
1. You can rotate the TIME/WEIGHT dial clockwise
or counter-clockwise.
2. Press the STOP/CLEAR button if you make a
mistake during programming.
3. If the electrical power supply to your microwave
oven is interrupted, the display will intermittently
show
this occurs during cooking, the programme will be
erased. The time of day will also be erased.
4. When you want to reset the time of day, follow the
above example again.
Choose the 24 hour
clock.
Power Level
Start the clock.
Power Level
after the power is reinstated. If
Power Level
Power Level
Set the hours. Rotate the TIME /
WEIGHT dial clockwise until the
correct hour is displayed (23).
Time/Weight
x1
Check the display.
x1
6
x1 for 3 secs.
x1
Change from hours to
minutes.
Power Level
x1