Basic Operation; Multiple Sequence Cooking - Sharp R-230AM Operation Manual With Cookbook

BASIC OPERATION

Your oven can be programmed for up to 90 minutes.
(90.00) The input unit of cooking (defrosting) time
varies from 10 seconds to five minutes. It depends on
the total length of the cooking (defrosting) time as
shown on the table.
Example:
Suppose you want to heat soup for 2 minutes and 30 seconds on 70P microwave power.
Enter desired cooking
time by rotating TIME/
WEIGHT dial clockwise.
Time/Weight
STIR TURN KG PCS MICRO COOK
NOTE:
1. When the door is opened during the cooking process, the cooking time on the digital display stops
automatically. The cooking time starts to count down again when the door is closed and the AUTO
MINUTE /START button is pressed.
2. If you wish to know the power level during cooking, press the POWER LEVEL button. As long as your
finger is touching the POWER LEVEL button, the power level will be displayed.
3. You can rotate the TIME/WEIGHT dial clockwise or counter-clockwise. If you rotate the knob counter-
clockwise, the cooking time will decrease from 90 minutes by units of time.

MULTIPLE SEQUENCE COOKING

A sequence of maximum 3 stages, consisting of manual cooking time and mode, can be set.
Example:
Suppose you want to cook rice for 5 minutes on 100P microwave power and then for 16 minutes on 30P power.
Input the time Input the
(5 min.) power 100P
1st Stage
Choose desired power. 70P
will appear on the display.
Power Level
x2
STIR TURN KG PCS MICRO COOK
Input the time
(16 min.)
8
Cooking time
0-5 minutes
5-10 minutes
10-30 minutes
30-90 minutes
Press AUTO MINUTE
/START button
once to begin cooking.
Auto Minute
/Start
STIR TURN
Input the
power 30P
2nd Stage
Increasing unit
10 seconds
30 seconds
1 minute
5 minutes
x1
.
KG PCS MICRO COOK
Start