Table of Contents
Advertisement
Memorising a station
You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
1
Perform steps 1 - 3 in "Tuning" on page 23.
2
Press the MEMORY button to enter the preset tuning sav-
ing mode.
3
Within 30 seconds, press the PRESET (
select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
4
Within 30 seconds, press the MEMORY button to store that
station in memory.
If the "MEMORY" and preset number indicators disappear
before the station is memorised, repeat the operation from step
2.
5
Repeat steps 1 - 4 to set other stations, or to change a pre-
set station.
When a new station is stored in memory, the station previously
memorised for that preset channel number will be erased.
Note:
The backup function protects the memorised stations for a few hours
should there be a power failure or the AC power lead become discon-
nected.
To recall a memorised station
Press the PRESET (
lect the desired station.
To scan the preset stations
The stations saved in memory can be scanned automatically. (Pre-
set memory scan)
1 Press the PRESET (
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
2 Press the PRESET (
tion is located.
or
) button to
To erase entire preset memory
1 Press the ON/STAND-BY button to enter the stand-by mode.
2 Whilst pressing down the
the TUNER (BAND) button until "TUNER CL" appears.
03/12/17
or
) button for less than 0.5 seconds to se-
or
) button for more than 0.5 seconds.
or
) button again when the desired sta-
button and the
button, press
CD-MPX870 EN.fm
CD-MPX870H
ENGLISH
1
2
3
4
5
6
7
8
E-24
Advertisement
Table of Contents
