Table of Contents
Advertisement
Playback will begin from track 1 on disc 1. After that disc finishes
playing, the next disc will automatically play.
After the last track on the fifth disc is played, the unit will stop au-
tomatically.
When there is no disc in one of the disc trays (1 - 5), the empty
tray will be skipped to the next tray with a disc.
To exchange other discs whilst playing a disc:
Press one of the
1 -
5 buttons for the stopped disc and within 5
seconds, press the
button and exchange discs.
To remove the discs:
In the stop mode, press the
1 -
5 buttons and within 5 seconds,
press the
button.
Caution:
Do not place two discs in a same tray.
Do not play discs of special shapes (heart, octagon, etc.) as it
may cause malfunctions.
Do not push the disc tray whilst it is moving.
If the power fails whilst the tray is open, wait until the power is re-
stored.
If the disc tray is stopped with force, "ER-CD20" will appear on the
display for 3 seconds and the unit will not function. If this occurs,
press the ON/STAND-BY button to enter the power stand-by
mode and then turn the power on again.
If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
If a disc is damaged, dirty, or loaded upside down, the disc will
skip or not play.
Various disc functions
Function
Main unit
Remote
control
Play
Stop
Pause
Track up/
Track down
Fast for-
ward/Fast
reverse
03/12/17
CD-MPX870 EN.fm
CD-MPX870H
ENGLISH
Operation
Press in the stop
mode.
Press in the playback
mode.
Press in the playback
mode. Press the
/
button to resume play-
back from the paused
point.
Press in the playback
or stop mode.
If you press the button
in the stop mode,
press the
/
button
to start the desired
track.
Press and hold down
in the playback mode.
Release the button to
resume playback.
E-14
1
2
3
4
5
6
7
8
Advertisement
Table of Contents
