Sharp CD-C491H Operation Manual page 6

<P=005>
(Continued)
Black
Red
Red
Black
RATED SPEAKER IMPEDANCE : 8 OHMS MIN.
IMPEDANCE NOMINALE DU HAUT-PARLEUR :
White
8 OHMS MINIMUM
line
Right
Caution:
Do not short out the speaker wires. When the power
is on and the speaker wires are shorted out, "PRO-
TECT" will appear and the unit will enter the stand-by
mode. (See page 42.)
Do not reverse the right channel and left channel
wires when connecting the speakers to the unit.
Sub woofer
Connect the sub woofer wire to the SUB WOOFER terminals as
shown.
Use a speaker with an impedance of 8 ohms or more, as a lower
impedance speaker can damage the unit.
Connect the black wire to the minus ( ) terminal, and the red
wire to the plus (+) terminal.
Surround speakers
Connect each surround speaker wire to the SURROUND
SPEAKER terminals as shown.
Use speakers with an impedance of 8 ohms or more, as lower
impedance speakers can damage the unit.
Connect the wire with the white line to the minus ( ) terminal
and the plain wire to the plus (+) terminal.
White
line
Left
Do not let bare speaker wires touch each other, as this may
damage the amplifier and/or speakers.
Do not allow any objects to fall into or to be placed in the bass
reflex ducts.
Do not stand or sit on the speakers. If the speakers fall or
collapse, you may be injured.
5
CD-C491H(SUK) TINSE0229AWZZ