Accessories - Sharp CD-C491H Operation Manual

<P=001>
(Continued)
When the ON/STAND-BY button is set at STAND-BY po-
sition, mains voltage is still present inside the unit.
When the ON/STAND-BY button is set at STAND-BY po-
sition and the clock is displayed, the unit may be brought
into operation by the timer mode or remote control.
Warning:
This unit contains no user serviceable parts. Never remove
covers unless qualified to do so. This unit contains danger-
ous voltages, always remove mains plug from the socket
before any service operation and when not in use for a long
period.
Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic" and the double-D symbol are trademarks
of Dolby Laboratories. Confidential Unpublished Works.
©1992-1997 Dolby Laboratories, Inc. All rights reserved.
QSOUND and the QLogo are registered trademarks of
QSound Labs, Inc.
QSound is protected under US Patent Nos. 5,105,462 and
5,208,860 and foreign counterparts.

ACCESSORIES

Remote control 1
Front speaker wire 2
Note:
Parts and accessories mentioned in this operation manual other than those in the drawing are not included.
FM aerial 1
Centre speaker wire 1
2
CD-C491H(SUK) TINSE0229AWZZ
Recording and playback of any material may require con-
sent, which SHARP is unable to give. Please refer partic-
ularly to the provisions of the Copyright Act 1956, the
Dramatic and Musical Performers Protection Act 1958, the
Performers Protection Acts 1963 and 1972 and to any
subsequent statutory enactments and orders.
"AA" size battery (UM/
SUM-3, R6, HP-7 or similar)
MW/LW loop aerial 1
2
Surround speaker wire
Sub woofer wire 1
2