Siemens Gigaset C470 IP User Manual page 75

Operating the base station answer machine
Operation via the handset
In answer and record mode
If the memory is full the answer machine automatically switches to announce only mode.
¤
Delete old messages.
The answer machine reverts automatically to answer and record mode.
Selecting announcement mode
You can choose between
¢ ¢
v Ð
Settings
Record / Announce Only
a
Press and hold (idle status).
The selected mode is saved even after the answer machine is deactivated.
The selection process will be cancelled if the message memory is already full when you
change to Ans. & Record
machine stays in announce only mode
¤
Delete old messages.
Only after messages have been deleted can you switch the answer machine to answer and
record mode.
Setting "Answer & Record" or "Announce Only" by toggling
You can use the Ans Mode Time
cific period.
Example: Ans. & Record
18.00, 08:00 the answer machine will switch to
From: Until:
at 18:00 (if it is switched on). It will switch back to
day.
¢ ¢
v Ð
Settings
‰
( = on)
Mode Time
¤
Change multiple line input:
From:
Enter hours/minutes for the start of the period in 4-digit format.
Until:
Enter hours/minutes for the end of the period in 4-digit format.
Activation:
Select or Off.
On
¤
Save changes with
If the messages memory is full and
and you will receive an instruction to delete old messages.
¤
Delete old messages and repeat the setting.
As soon as you change the announcement mode (page 72), the
automatically deactivated. You may have to reactivate it if required.
If you do not enter a time for
machine will not switch to announcement mode.
72
Ans. & Record and
¢
Voice Mail Local AM
‰
( = on)
mode. You will be requested to delete old messages. The answer
Announce
setting to change over the announcement mode for a spe-
mode is set. If you activate
¢
Voice Mail Local AM
.
§Save§
Activation: On
From: / Until:,
Announce Only.
¢
Announcements
Only.
Ans Mode Time
Announce Only
Ans. & Record
¢
Announcements
has been selected, saving is interrupted
Ans Mode Time will still be activated but the
¢ ¢
Set Ans. Mode
and set the time period
mode every day
mode at 08:00 the next
¢ ¢
Set Ans. Mode
Ans Mode Time function is
Ans. &
Ans