Siemens Gigaset C470 IP User Manual page 55

Using the directory and lists
Directory/call-by-call list
Delete List
Delete all entries in the directory or in the call-by-call list.
Copy List
Send complete list to a handset (page 52).
Available Memory
Display the available entries in the directory and call-by-call list.
Using quick dial keys
How to assign phone numbers to the keypad on your handset is described on page 50.
¤
Press and hold the required quick dial key.
If there is a valid line suffix at the end of the number in the directory (e.g.: #1), the number
will be dialled via the line belonging to the suffix (page 133).
A number with a hash key (#) only at the end will be dialled via the default connection.
A number with a star (*) at the end will be dialled via the non-default connection
(page 116).
If no suffix is entered, the number will be dialled via the default connection. Exception: A
dialling plan has been defined for the number (page 149).
Sending the directory/call-by-call list to another handset
Preconditions:
u
The sending and receiving handsets must both be registered to the same base station.
u
The other handset can send and receive directory entries.
¢
s / C q (Select entry; page 51)
s
Select the internal number of the receiving handset and press
A successful transfer is confirmed by a message and confirmation tone on the receiving
handset.
You can transfer several individual entries one after the other by responding
Copy next entry? prompt.
Please note:
u
Entries with identical numbers are not overwritten in the receiver handset.
u
The transfer is cancelled if the phone rings or if the memory of the receiving handset is
full.
52
¢ ¢
Copy Entry
§Options§
/
Copy List
.
§OK§
to the
§Yes§