Installing The Base Station - Siemens Gigaset C470 IP User Manual

First steps

Installing the base station

Time:
Enter hours and minutes as 4 digits, e.g. Q M 5 for 07:15 a.m.
Press the display key
§Save§
The date and time are shown in the handset's idle display (page 1).
Setting the area codes
To be able to call back a caller using the calls list (page 58), the area code ("local area
code") in which your phone is being used must be stored. If your phone is in a "multiple
area code" area, the extra codes for this area must also be stored.
Area Code
¢ ¢
v Ð
Settings
~
Enter the local area code.
Press the display key.
§Save§
a
Press and hold (idle status).
Extra Codes
¢ ¢
v Ð
Settings
q
Select an entry and press
~
Enter the extra code.
Press the display key.
§Save§
Repeat the above steps until all extra codes for your area have been entered. A maximum
of 5 extra codes can be stored.
a
Press and hold (idle status).
Registering the handset to the base station
Your handset is registered to the base station by default.
Instructions on how to register additional handsets with the base station and make free
internal calls can be found from page 98.
Installing the base station
The base station is designed for use in closed, dry rooms with a temperature range of +5 °C
to +45 °C.
¤
Place or hang the base station in a central position in your flat or house.
Instructions for mounting the base station on the wall can be found page 215.
Please note:
u
Never expose the telephone to heat sources, direct sunlight or other electrical appli-
ances.
u
Protect your Gigaset from moisture, dust, corrosive liquids and vapours.
14
¢
Telephony Area Code
¢
Telephony Extra Codes
.
§Edit§