Receiving An Sms - Siemens Gigaset C470 IP User Manual

SMS (text messages)

Receiving an SMS

Receiving an SMS
All received SMS messages are saved in the incoming message list. Linked SMS messages
are displayed as one message. If this is too long (it consists of too many linked individual
SMS messages) or if it was not fully transmitted, it will be split into several individual SMS
messages.
Since an SMS remains in the list even after it has been read, you should regularly delete
SMS messages from the list.
The display tells you if the SMS memory is full.
¤
Delete SMS messages you no longer require (page 64).
Incoming message list
The incoming message list contains:
u
All received SMS messages, starting with the most recent.
u
SMS messages that could not be sent due to an error.
New SMS messages are signalled on all Gigaset C47H handsets by the À icon in the display,
the flashing message key f and an advisory tone.
Opening the incoming message list with the
f
Press.
Select a mailbox if necessary and enter mailbox PIN.
The incoming message list is displayed as follows (example):
SMS: (2)
1 Bold: number of new entries
Regular: number of read entries
2 Name of mailbox, here: general mailbox
Open list with .
§OK§
An entry in the list is displayed as in the following example:
1234567890
01.01.08 09:45
1 Number of the sender or name of the directory entry
2 SMS status:
Bold: new unread SMS messages
Regular: old read SMS messages
Opening the incoming message list via the SMS menu
¢
v î
Messaging
Reading or deleting SMS messages
¤
Open the incoming message list.
¤
Continue as described in "Reading or deleting SMS messages", page 63.
After you have read a new SMS, it is given the status "Old" (it is no longer shown in bold).
64
1
2
1
2
¢ ¢
SMS (mailbox, mailbox PIN)
f
key
¢
Incoming (2)