Other information that a vCard may contain is not entered into the handset directory.
Example for an entry in vCard format:
BEGIN:VCARD
VERSION:2.1
N:Smith;Anna
TEL;HOME:1234567890
TEL;WORK:0299123456
TEL;CELL:0175987654321
EMAIL:anna@smith.com
BDAY:2008-01-12T11:00
X-SIEMENS-VIP:1
END:VCARD
Activating VoIP status message display
You can display VoIP status messages on your handset when there are VoIP connection
problems. These messages give you information on the status of a connection and contain
a provider-specific status code that helps the service team when they are analysing the
problem.
¤
Open the following Web page:
The settings are carried out in the
¤
Click the
Yes
option next to
display.
If you click No, no VoIP status messages are displayed.
¤
Click
Set
to save the changes.
Please note:
A table with possible status codes and their meaning can be found in the appendix on page 168.
Starting a firmware update
If necessary, you can load updates of the base station firmware onto your phone.
The server on which Siemens makes new firmware versions available for your base station
is set by default. The URL of the Internet server is displayed in the
You should only change this URL under exceptional circumstances (e.g. if requested to do
so due to erroneous behaviour). This address is also used to load provider information from
the Internet. You should therefore make a note of the default URL before you overwrite it.
Otherwise, you will only be able to reactivate the default URL by resetting the base station
back to the factory settings (page 114).
Please note:
– When updating from the Internet, checks are made to ensure that no newer version of the
firmware exists. If this is not the case, the operation is terminated.
– The firmware is only loaded from the Internet if you have not entered a local file in the
firmware file
field prior to the update.
Web configurator – configuring the telephone via a PC
¢
Settings
Handsets.
Miscellaneous
Show VoIP status on handset
Activating VoIP status message display
area.
to activate the status message
Data server
field.
User defined
159