Activating/Deactivating The Automatic Version Check; Copy Date And Time From Time Server - Siemens Gigaset C470 IP User Manual

Activating/deactivating the automatic version check

When the version check is activated, the phone checks on a daily basis whether the Sie-
mens configuration server is carrying a new version of the phone firmware or of the file
with the general settings for your VoIP provider.
If a new version is available, a notification is sent to the handset and the message key
flashes. You can then carry out an automatic update of the firmware (page 117) or of the
VoIP provider settings (page 119).
¤
Open the following Web page:
¤
Click next to
Yes
sion check.
Click No if you do not want a version check to be carried out.
¤
Click Set to save the changes.

Copy date and time from time server

The date and time are shown in the idle display of registered handsets. They are important,
for example, for stating the correct time in the calls list and for the "alarm clock" function.
There are two methods for updating the time and date on your base station: manually with
one of the registered handsets (page 13) or automatically by synchronisation with a time
server on the Internet.
Activate/deactivate synchronisation with a time server as follows:
¤
Open the following Web page:
¤
In the
Automatic adjustment of System Time with Time Server
chronisation between base station and a time server. If you select
will not adopt time settings from a time server. In this case you should set the time and
date manually using a handset.
¤
The
Last synchronisation with time server
compared time and date settings with a time server.
¤
In the Time Server
the base station should adopt its time and date settings. The time server
"europe.pool.ntp.org" is set as default on the base station. You can overwrite the set-
ting.
¤
From the Country
¤
The Time Zone field shows the valid time zone for the Country. It shows the deviation
between local time (not summer time) and Greenwich Mean Time (GMT).
If a country is divided into various time zones, they will all appear in the list. Select the
appropriate Time Zone
¤
The Automatically adjust clock to summer-time changes
zone differentiates between summer time and winter time.
Activate if you want the time to change automatically to summer time or winter time
On
when summer time begins and ends respectively.
Activate Off if you do not want to change to summer time.
Settings
Automatic check for software/profile updates
Settings
field, enter the Internet address or name of the time server from which
list, select the country in which your base station is being operated.
for the base station from the list.
Web configurator – configuring the telephone via a PC
Activating/deactivating the automatic version check
¢
Miscellaneous.
to activate the automatic ver-
¢
Miscellaneous.
field select
field shows the last time when the base station
field will be displayed if your time
to activate syn-
Yes
No the base station
161