Advanced Cd Or Mp3/Wma Disc Playback - Sharp XL-DH330PH Operation Manual

Advanced CD or MP3/WMA disc playback (continued)
■ Random play
The tracks on the disc can be played in random order
automatically.
To random play all tracks:
Press and hold down PLAY MODE button on the remote
control until "RANDOM" appears. Press the
/ ) button.
To cancel random play:
Press and hold the PLAY MODE button until "NORMAL"
appears and "R" disappears.
Notes:
● If you press the
button during random play, you can
move to the track selected next by the random opera-
tion. On the other hand, the
you to move to the previous track. The beginning of the
track being played will be located.
● In random play, the unit will select and play tracks
automatically. (You cannot select the order of the
tracks.)
Caution:
After performing repeat play, be sure to press the
USB ) button. Otherwise, the disc will play continuously.
■ Programmed play (CD)
You can choose up to 32 selections for playback in the
order you like.
1
Whilst in the stop mode, press the MEMORY button on
the remote control to enter the programming save
mode.
2
Press the or buttons on the remote control to
select the desired track.
Selected track number
3
Press the MEMORY button to save the track number.
4
Repeat steps 2 - 3 for other tracks. Up to 32 tracks can
be programmed. If you want to check the programmed
tracks, press the MEMORY button repeatedly. If you
make a mistake, the programmed tracks can be cleared
by pressing the CLEAR button.
5
Press the / (CD/USB
/ (CD/USB
button does not allow
(CD/
/ ) button to start playback.
■ Programmed play (MP3/WMA)
1
Whilst in the stop mode, press the MEMORY button to
enter the programming save mode.
2
Press the PRESET (
control to select the desired folder.
Then press the
to select the desired tracks.
3
Press the MEMORY button to save the folder and track
number.
4
Repeat steps 2 - 3 for other folder/tracks. Up to 32
tracks can be programmed.
5
Press the / (CD/USB
To cancel the programmed play mode:
During programmed stop mode, press the
button. The display will show "MEM CLEAR" and all the
programmed contents will be cleared.
Adding tracks to the programme:
If a programme has been previously stored, the
"MEMORY" indicator will be displayed. Press the
MEMORY button repeatedly to go to the last programme
memory. Then follow steps 2 - 3 to add tracks. The new
tracks will be stored after the last track of the previous
programme.
Notes:
● When a disc is ejected, the programme is automatically
cancelled.
● If you press the ON/STAND-BY button to enter the
stand-by mode or change the function from CD to
another, the programmed selections will be cleared.
● During the programme operation, random play is not
possible.
E-10
or ) button on the remote
or button on the remote control
/ ) button to start playback.
(CD/USB )