Setting The Clock (Remote Control Only); Bluetooth One Touch Connection Via Nfc - Sharp XL-LS703BH Operation Manual

Setting the clock (Remote control only)

In this example, the clock is set for the 24-hour (0:00 - 23:59)
display.
1
Press the ON/STANDBY button to turn the power on.
2
Press the CLOCK button.
3
Within 10 seconds, press the ENTER button. To adjust
the day, press the
press the ENTER button.
4
Press the or
12-hour display and then press the ENTER button.
The 24-hour display will appear.
(0:00 - 23:59)
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
The 12-hour display will appear.
(AM 0:00 - PM 11:59)

Bluetooth one touch connection via NFC

■ About NFC technology
Near Field Communication (NFC) is a set of standards for
devices (smartphones/tablets) to establish radio communi-
cation with each other by touching/tapping them together or
bringing them into close proximity.
Using NFC in this product simplifies the pairing method of
Bluetooth connectivity.
This audio system supports NFC-enabled device with
●
Android 4.1, Jelly Bean and higher.
For device with a lower Android version, refer the
●
operation manual of the device for recommended app
(application).
A Bluetooth audio
source device
(smartphone /
tablet).
or button and then
button to select 24-hour or
5
To adjust the hour, press the
and then press the ENTER button. Press the
button once to advance the time by 1 hour. Hold
it down to advance continuously.
6
To adjust the minutes, press the
ton and then press the ENTER button. Press the
or button once to advance the time by 1 minute.
Hold it down to advance the time by 5 minutes interval.
To confirm the time display:
Press the CLOCK button. The time display will appear for
about 10 seconds.
Note:
When power supply is restored after unit is plugged in again
or after a power failure, reset the clock.
To readjust the clock:
Perform "Setting the clock" from step 1.
To change the 24-hour or 12-hour display:
1
Clear all the programmed contents. [Refer to "Factory
reset, clearing all memory" on page 17 for details.]
2
Perform "Setting the clock" from step 1 onward.
Unlike other wireless technology, NFC requires no
discovery or pairing.
Simply tap the source device to the N-Mark on remote
control or main unit to instantly enjoy seamless con-
nectivity between your smart device and the audio
system.
■ NFC detection area
NFC detection area location may vary depending on the
device (smartphone / tablet). Refer operation manual of
the device for detail.
E-6
or
or
(during Bluetooth
standby mode)
button
or
but-
MICRO COMPONENT SYSTEM XL-LS703B