Checking Signal Strength And Channel Strength - Sharp AQUOS LC-42D85X Operation Manual

Preparation
Checking signal strength and
channel strength
If you install a DVB-T antenna for the fi rst time or
relocate it, you should adjust the alignment of the
antenna to receive a good reception while checking
the antenna setup screen.
Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
Press a / b to select "Antenna Setup-
3
DIGITAL", and then press ENTER.
H Checking signal strength
Press a / b to select "Signal Strength".
Supply Voltage
Signal Strength
Channel Strength
CH No.
Signal Strength
Quality
H Checking channel strength
Press a / b to select "Channel Strength", and
then press ENTER.
Supply Voltage
Signal Strength
Channel Strength
CH No.
Signal Strength
Quality
Position and align the antenna so that the
4
maximum possible values for "Signal Strength"
and "Quality" are obtained.
NOTE
• The values of "Signal Strength" and "Quality" indicate when
to check the appropriate alignment of the antenna.
12
21
Current 0 Max. 0
Current 0 Max. 0
2 6 5 . 2
MHz
21
Current 0 Max. 0
Current 0 Max. 0