Sharp LC-46D65E/RU Service Manual
  1. Manuals
  2. Brands
  3. Sharp Manuals
  4. LCD TV
  5. LC-46D65E/RU
  6. Service manual
Sharp LC-46D65E/RU Service Manual

Sharp LC-46D65E/RU Service Manual

Hide thumbs Also See for LC-46D65E/RU:
Table of Contents

Advertisement

Quick Links

TopPage
In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its orig-
inal condition and only parts identical to those specified should be used.
SAFETY PRECAUTION
CAUTION ............................................... . ............i
End of life disposal ................................. . .......... iii
[1]
SPECIFICATIONS ................................. . ....... 1-1
[2]
OPERATION MANUAL .......................... . ....... 1-2
[3]
DIMENSIONS ........................................ . ....... 1-7
[1]
REMOVING OF MAJOR PARTS ........... . ....... 2-1
[1]
ADJUSTMENT PROCEDURE ............... . ....... 3-1
[1]
TROUBLESHOOTING TABLE............... . ....... 4-1
[2]
error........................................................ . ..... 4-13
Parts marked with "
" are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the
safety and performance of the set.

SERVICE MANUAL

LCD COLOUR TELEVISION
LC-46D65E/RU
MODELS
CONTENTS
[1]
MAIN BLOCK DIAGRAM...............................5-1
[2]
SYSTEM BLOCK DIAGRAM .........................5-3
[3]
OVERALL WIRING DIAGRAM ......................5-4
[1]
[2]
[3]
CHAPTER 7. SCHEMATIC DIAGRAM
[1]
GRAM............................................................7-1
[2]
SCHEMATIC DIAGRAM ................................7-2
LC-46D65E/RU
No. S08R9LC46D65E
This document has been published to be used for
after sales service only.
The contents are subject to change without notice.

Advertisement

Table of Contents
loading

Related Manuals for Sharp LC-46D65E/RU

Summary of Contents for Sharp LC-46D65E/RU

  • Page 1: Table Of Contents

    TopPage LC-46D65E/RU SERVICE MANUAL No. S08R9LC46D65E LCD COLOUR TELEVISION LC-46D65E/RU MODELS In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its orig- inal condition and only parts identical to those specified should be used.

  • Page 2: Important Service Safety Pre

    LC-46D65E/RU LC46D65E SAFETY PRECAUTION Service Manual IMPORTANT SERVICE SAFETY PRECAUTION Service work should be performed only by qualified service technicians who are thoroughly familiar with all safety checks and the servicing guidelines which follow: WARNING • Use an AC voltmeter having with 5000 ohm per volt, or higher, sen- sitivity or measure the AC voltage drop across the resistor.

  • Page 3: Precautions For Using Lead-Free Solder

    LC-46D65E/RU Precautions for using lead-free solder Employing lead-free solder • “PWBs” of this model employs lead-free solder. The LF symbol indicates lead-free solder, and is attached on the PWBs and service manuals. The alphabetical character following LF shows the type of lead-free solder.

  • Page 4: End Of Life Disposal

    If the product is used for business purposes and you want to discard it: Please contact your SHARP dealer who will inform you about the take-back of the product. You might be charged for the costs arising from take-back and recycling. Small products (and small amounts) might be taken back by your local collection facilities.

  • Page 5: Chapter 1. Operation Manual

    • As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
  • Page 6 LC-46D65E/RU [2] OPERATION MANUAL Remote control unit (Standby/On) Exit the “MENU” screen. Buttons for useful operations R/G/Y/B (Colour) buttons The coloured buttons are (Teletext) correspondingly used to select the ATV: Display analogue teletext. coloured items on the screen (e.g. DTV: Select MHEG-5 and teletext for EPG, MHEG-5, Teletext).
  • Page 7 LC-46D65E/RU TV (Front view) Remote control sensor OPC sensor OPC indicator (Standby/On) indicator TV (Rear view) (Power) button MENU button (INPUT SOURCE) WARNING: button Excessive sound pressure from earphones and headphones can cause hearing loss. Programme (channel) EXT4 (ANALOGUE RGB/AUDIO)
  • Page 8 LC-46D65E/RU Attaching the stand unit Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal. Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it from being damaged.

  • Page 9: Cautions Regarding The Remote Control Unit

    LC-46D65E/RU Inserting the batteries Before using the TV for the first time, insert two supplied “AAA” size alkaline batteries. When the batteries become depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries.

  • Page 10: Information On The Software License For This Product

    The copyrights for the software components and various relevant documents included with this product that were developed or written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties, and other relevant laws. This product also makes use of freely distributed software and software components whose copyrights are held by third parties.

  • Page 11: Dimensions

    LC-46D65E/RU [3] DIMENSIONS Unit: mm 550.0 1113.0 106.6 101.4 1023.4 295.0 400.0 1 – 7...

  • Page 12: Chapter 2. Removing Of Major Parts

    LC-46D65E/RU CHAPTER 2. LC46D65E REMOVING OF MAJOR PARTS Service Manual [1] REMOVING OF MAJOR PARTS 1. Removing of Stand Unit and Rear Cabinet 1. Remove the 4 lock screws and detach the Stand Unit. 2. Remove the 2 lock screws.

  • Page 13: Key Unit

    LC-46D65E/RU 2. Removing of Bottom Cover, Speakers, LED Unit and KEY Unit 1. Remove the 1 lock screw and detach the Bottom Cover. 2. Disconnect SP-Wire. Remove the 2 lock screws. Detach the Speaker-L/R. 3. Detach the R/C, LED Unit, and disconnect RA-Wire.
  • Page 14 LC-46D65E/RU 3. Removing of Full Shield and Side AV Cover 1. Remove the 3 lock screws and detach the Side AV Cover. 2. Remove the 7 lock screws, 4 lock shafts and detach the Full Shield. Side AV Cover Full Shield...
  • Page 15 LC-46D65E/RU 4. Removing of Connectors 1. Disconnect all the connectors from all the PWBs. [LB2] [LA] [LP] [LW] [PL] MAIN Unit [LB1] [LB2] [LB1] [PD] 1 [LA] [PD] [PL] [LW] [LP] [KM] [RA] [SP] POWER Unit 2 – 4...
  • Page 16 LC-46D65E/RU 5. Removing of MAIN Unit, POWER Unit and Power PWB Holder 1. Remove the 8 lock screws and detach the MAIN Unit. 2. Remove the 6 lock screws and detach the POWER Unit Ass’y. POWER Unit Holder MAIN Unit POWER Unit 2 –...
  • Page 17 LC-46D65E/RU 6. Removing of Panel Support Angles and LCD Panel Module 1. Remove the 16 lock screws and detach the Panel Support Angle. 2. Remove the 10lock screws and detach the LCD Panel Module. Panel Support Angle 46" LCD Panel Module...
  • Page 18 LC-46D65E/RU 7. Removing of the Lamp 1. Remove the 16 lock screws. Detach the Diffusion Sheet and Diffusion Panel. 2. Detach the 4 Sheet Holders. 3. Remove the 2 Lamp Holders. Detach the Lamp Sockets and Lamps. BL Chassis Ass'y...

  • Page 19: Chapter 3. Adjustment Procedure

    LC-46D65E/RU CHAPTER 3. LC46D65E ADJUSTMENT PROCEDURE Service Manual [1] ADJUSTMENT PROCEDURE 1. Adjustment method after PWB and/or IC replacement due to repair The unit is set to the optimum at the time of shipment from the factory. If any value should become improper or any adjustment is necessary due to the part replacement, make an adjustment according to the following procedure.
  • Page 20 LC-46D65E/RU 4. Description of display (1) Page/ of present number of total pages (4) Inducing display (2) Input that has been selected now (5) Model name (3) Present colour system 1/16 INPUT1 AUTO EURO 46E_D65 MAIN Version 1.00 (E 2008/07/10 D)

  • Page 21: Adjustment Process Mode Menu

    LC-46D65E/RU 5. Adjustment process mode menu The character string in brackets [ ] will appear as a page title in the adjustment process menu header. Page Line Item Description Remarks (adjustment detail, etc.) 1/16 MAIN Version Main software version BOOT Version BOOT Version.
  • Page 22 LC-46D65E/RU Page Line Item Description Remarks (adjustment detail, etc.) 8/16 ANALOG PC ADJ Enter DVI ANALOG video level adjustment R OFFSET R CUTOFF adjustment value G OFFSET G CUTOFF adjustment value B OFFSET B CUTOFF adjustment value R GAIN R DRIVE adjustment value...

  • Page 23: Special Features

    LC-46D65E/RU 6. Special features 1. NORMAL STANDBY CAUSE (Page 1/16) Display of a cause (code) of the last standby. The cause of the last standby is recorded in EEPROM whenever possible. Checking this code will be useful in finding a problem when you repair the troubled set.
  • Page 24 LC-46D65E/RU 8. Public Mode (Hotel Mode) 1. Starting the Public Mode • There are two following ways to display the PUBLIC Mode setting screen. 1) On the process adjustment mode screen (2/16), set the “HOTEL MODE” Flag to ON. Turn off the power, and turn it on again, pressing the keys of the main unit at the same time.
  • Page 25 LC-46D65E/RU 4. Basic operation in the Public Mode </> Change or execution of the set value. Volume or Cursor Movement to the selected item. Channel or Cursor Decision (ok) Execution (Used by the items “Execution” and “RESET”.) PUBLIC Mode R/C Ordinary operation mode: It enters the PUBLIC Mode.
  • Page 26 LC-46D65E/RU 6. Setting items (* Item names and selective items are expressed in English.) 1) Power ON fixed [POWER ON FIXED] Option “VARIABLE”, “FIXED_ALL”, “FIXED_BODYKEY” or “RC RESPOND” (loop enabled) Default “VARIABLE” Function • When set to “FIXED_ALL”, the “POWER/RECEPTION” key on the main unit or remote control is disabled.
  • Page 27 LC-46D65E/RU 5) Volume fixed level [VOLUME FIXED LEVEL] Option 0 ~ 60 (loop disabled) Default Function The volume is fixed to the adjusted value (the main unit’s speaker only). Exception • In the adjustment process, the volume can be set to any level regardless of this setting.
  • Page 28 LC-46D65E/RU 10)OSD display [ON SCREEN DISPLAY] Option “YES”, “NO” or “LIMITED” (loop enabled) “LIMITED” is looped only in case of need (destination). Default Function • When set to “NO”, the following OSD is not displayed. Registration, setting, adjustment menu, channel call, volume bar, and input select •...
  • Page 29 LC-46D65E/RU 15)232C power ON control [232C POWON] Option “ENABLE” or “DISABLE” (loop enabled) Default DISABLE Function Power ON by the 232C command is enabled/ disabled in the standby state. The same function as 232C command “RSPW”. “ENABLE”: POWR0001 is always enabled.

  • Page 30: Video Signal Adjustment Procedure

    LC-46D65E/RU 9. Video signal adjustment procedure The adjustment process mode menu is listed in Section 5. Signal generator level adjustment check (Adjustment to the specified level) : 0.7Vp-p ± 0.02Vp-p (Pedestal to white level) • Composite signal PAL : 0.7Vp-p ± 0.02Vp-p •...
  • Page 31 LC-46D65E/RU 5. ADC adjustment (Component 15K) Adjustment point Adjustment Conditions Adjustment procedure • Feed the COMPONENT 15K 100% full field colour bar signal (100% colour Setting [Signal] COMP15K, 50Hz saturation) to EXT3 COMPONENT IN. 100% Full Field Colour Bar sig-...

  • Page 32: White Balance Adjustment

    LC-46D65E/RU 10. White Balance Adjustment For white balance adjustment, adjust the offset values on pages 12/16. [Condition of the unit for inspection] : PC mode, Modulated light (+16), Color temperature (High) [Input signal condition] : HDMI 1080i 15IRE (LO), 78IRE (HI)
  • Page 33 LC-46D65E/RU 13. Upgrading the software 1. Turn off the AC power (Unplug the AC power cord). 2. Insert the upgrading USB flash memory for upgrade into the service slot. 3. While holding down the power button, plug in the AC power cord of the main unit to turn on the power.
  • Page 34 LC-46D65E/RU 6. When all the procedures are complete, the following upgrade success screen shows up. The new software version can be confirmed on screen. The version number appears when each item has been successfully upgraded. Finally the main version number appears on screen.

  • Page 35: Chapter 4. Troubleshooting Table Troubleshooting Table

    LC-46D65E/RU CHAPTER 4. LC46D65E TROUBLESHOOTING TABLE Service Manual [1] TROUBLESHOOTING TABLE The sound is not emitted from the speaker though the picture has come out. No sound output in all modes.? Is I2SO_DATA signal output more than IC1302 (DSP)? Is the I2C SERIAL DATA/CLOCK communication of IC1302 nor-...
  • Page 36 LC-46D65E/RU No sound (during the reception of TV (DIGITAL) broadcasting) (1) Does not the sound go out though the picture has come out when DTV is received? Is DTV_I2S signal output from pin (F4/DTV_SCK), (F5/DTV_WS) Check IC8101 and its peripheral circuits.
  • Page 37 LC-46D65E/RU No sound from external input devices (3) Does not the sound of the audio signal input to HDMI-2 Does not the sound of the audio signal input to PC mode go mode go out? out? “Checked whether to have selected” “Analogue” “by the Audio setup of the HDMI option.”...
  • Page 38 LC-46D65E/RU The audio signal is not output (1) No audio signal output from EXT1/EXT2 terminal. Is there a audio output signal in pins (3/L-ch) and (1/R-ch) of Check the setting of an external input device that connects with EXT1 (SC502)? EXT1.
  • Page 39 LC-46D65E/RU The audio signal is not output (3) No sound from HEADPHONE_OUTPUT terminal. Is the HP_PLUG signal input to pin (90) of IC9101 (CPLD) from Check the line between J1302 and IC9101. pin (6) of a HEADPHONE_OUTPUT terminal (J1302)? (J1302, IC9101, etc.)
  • Page 40 LC-46D65E/RU No picture on the display (2) Does not the picture come out when VHF/UHF is received? Is the video signal (TUNER_CVBS) output from pin (6) of Check whether I2C signal normally communicates between TUNER (TU7501)? TU7501 and IC7508 (COFDM - DEMOD.) Is the video signal (TUNER_CVBS) sent to pins (24) of Check the line between TU7501 and IC503.
  • Page 41 LC-46D65E/RU [External input EXT1, EXT2] No picture on the display (4) Does not the picture of the CVBS signal input to EXT1 go out? Does not the picture of the CVBS signal input to EXT2 go out? Is CVBS signal sent to pin (20) of EXT1 (SC502)? Check the setting of an external input device that connects with EXT1.
  • Page 42 LC-46D65E/RU [External input EXT1, EXT2] No picture on the display (6) Does not the picture of the R/G/B signal input to EXT1 go out? Does not the picture of the R/G/B signal input to EXT2 go out? Is RGB1 signal sent to pins (15)/R1, (11)/G1 and (7)/B1 of EXT1...
  • Page 43 LC-46D65E/RU [External input EXT4] No picture on the display (8) Does not the picture of the DVI (ANALOG) video signal input to EXT4 (15pin-D-SUB terminal) go out? Are the video signal and the synchronized signal input from pin Check the connection and setup with the external DVI devices.
  • Page 44 LC-46D65E/RU [External input HDMI-1/2/3] No picture on the display (10) Does not the picture/sound of the HDMI signal input to HDMI-1/2/3 go out? Is the Hot plug detection function output from pin (19) of the HDMI-1 Check the line between SC1502 and pin(50) of IC1507 (SC1502) normal? (TMDS-SW).
  • Page 45 LC-46D65E/RU <During external connection> No picture on the monitor (1) No picture appears on EXT1/EXT2 connected monitor during the U/V reception. Is CVBS signal output into pin (19) of EXT1 (SC502) from pin Check the setting of an external input device that connects with (67) of IC503 (AV_SW)? EXT1.
  • Page 46 LC-46D65E/RU <During external connection> No picture on the monitor (3) No picture from EXT1 appears on EXT2-connected monitor. Is CVBS signal output into pin (19) of EXT2 (SC501)? Check the setting of an external input device that connects with EXT2.

  • Page 47: Led Flashing Specification At The Time Of The Error

    LC-46D65E/RU [2] LED flashing specification at the time of the error Display method • Refer to Table 1. • Make the OPC LED flash using the [MENU] key on the remote control since the display for service persons is identified by the number of flashings (once to 5 times).
  • Page 48 LC-46D65E/RU MONITOR ERR STBY table Outline: Communication/Power failure detected by the monitor microprocessor (IC2003) is stored on EEPROM, and the last 4 abnormal states can be confirmed in the adjustment process mode. Location: Page 1/16 of the adjustment process mode: MONITOR ERR CAUSE “0”...
  • Page 49 LC-46D65E/RU 2) Inverter/Lamp failure details (Power red LED flashes once and OPC (preset) LED flashes) Error type OPC (preset) LED operation (1 cycle) Note: Pins are monitor microprocessor pins unless otherwise specified (IC2003). H: On ERR_PNL (40pin): Abnormal L. Confirmed after 5 consecutive detections at 1 second intervals (detected only when the backlight is on).
  • Page 50 LC-46D65E/RU — M E M O — 4 – 16...

  • Page 51: Chapter 5. Block Diagram/Wiring Diagram

    LC-46D65E/RU CHAPTER 5. LC46D65E BLOCK DIAGRAM/WIRING DIAGRAM Service Manual [1] MAIN BLOCK DIAGRAM MAIN BLOCK DIAGRAM-1 5 – 1...
  • Page 52 LC-46D65E/RU MAIN BLOCK DIAGRAM-2 5 – 2...

  • Page 53: System Block Diagram

    LC-46D65E/RU [2] SYSTEM BLOCK DIAGRAM SYSTEM BLOCK DIAGRAM 5 – 3...

  • Page 54: Overall Wiring Diagram

    LC-46D65E/RU [3] OVERALL WIRING DIAGRAM OVERALL WIRING BLOCK DIAGRAM 5 – 4...

  • Page 55: Chapter 6. Printed Wiring Board

    LC-46D65E/RU CHAPTER 6. LC46D65E PRINTED WIRING BOARD Service Manual [1] MAIN UNIT PRINTED WIRING BOARD MAIN Unit (Side A) 6 – 1...
  • Page 56 LC-46D65E/RU MAIN Unit ( Chip Side A SC5302 SC5301 FL516 R628 R568 R5346 R5301 R2080 Q5302 VA8101 VA8102 S2002 S2003 S2005 S2006 S2004 S2001 S2007 IC5302 D5302 R5350 R1363 R2081 D7510 P5002 R5305 D7511 C7513 C7536 C7514 R5303 R7536 C7531...
  • Page 57 LC-46D65E/RU MAIN Unit (Side B) 6 – 3...
  • Page 58 LC-46D65E/RU MAIN Unit (Chip Side B) D2005 R2082 R2083 R5307 D7506 C7535 R7555 R7517 R5324 C5240 R5321 R5320 D7505 C7521 R5325 R5311 R5326 R7537 C7525 C5202 R5322 R7538 R5323 R5327 R7528 R5312 R7510 R5304 R7524 C5053 R5333 R8150 R8160 FB7501...

  • Page 59: Led Unit Printed Wiring Board

    LC-46D65E/RU [2] LED UNIT PRINTED WIRING BOARD LED Unit (Side A) LED Unit (Chip Side A) LED Unit (Side B) LED Unit (Chip Side B) 6 – 5...

  • Page 60: Key Unit Printed Wiring Board

    LC-46D65E/RU [3] KEY UNIT PRINTED WIRING BOARD KEY Unit (Side-A) KEY Unit (Side-AChip) R154 D155 P151 R152 6 – 6...

  • Page 61: Description Of Schematic Diagram

    LC-46D65E/RU CHAPTER 7. LC46D65E SCHEMATIC DIAGRAM Service Manual [1] DESCRIPTION OF SCHEMATIC DIAGRAM VOLTAGE MEASUREMENT CONDITION: 1. The voltages at test points are measured on exclusive AC adaptor and the stable supply voltage of AC 230V. Signals are fed by a colour bar signal generator for servicing purpose and the above voltages are measured with a 20k ohm/V tester.
  • Page 62 LC-46D65E/RU [2] SCHEMATIC DIAGRAM MAIN Unit-1 AND SHADED COMPONENTS=SAFETY RELATED PARTS 7 – 2...
  • Page 63 LC-46D65E/RU MAIN Unit-2 7 – 3...
  • Page 64 LC-46D65E/RU MAIN Unit-3 7 – 4...
  • Page 65 LC-46D65E/RU MAIN Unit-4 7 – 5...
  • Page 66 LC-46D65E/RU MAIN Unit-5 7 – 6...
  • Page 67 LC-46D65E/RU MAIN Unit-6 7 – 7...
  • Page 68 LC-46D65E/RU MAIN Unit-7 7 – 8...
  • Page 69 LC-46D65E/RU MAIN Unit-8 7 – 9...
  • Page 70 LC-46D65E/RU MAIN Unit-9 7 – 10...
  • Page 71 LC-46D65E/RU MAIN Unit-10 7 – 11...
  • Page 72 LC-46D65E/RU MAIN Unit-11 7 – 12...
  • Page 73 LC-46D65E/RU MAIN Unit-12 7 – 13...
  • Page 74 LC-46D65E/RU MAIN Unit-13 7 – 14...
  • Page 75 LC-46D65E/RU MAIN Unit-14 7 – 15...
  • Page 76 LC-46D65E/RU MAIN Unit-15 7 – 16...
  • Page 77 LC-46D65E/RU MAIN Unit-16 7 – 17...
  • Page 78 LC-46D65E/RU LED Unit 7 – 18...
  • Page 79 LC-46D65E/RU KEY Unit 7 – 19...
  • Page 80 LC-46D65E/RU — M E M O — 7 – 20...

  • Page 81: Parts Guide

    LC-46D65E/RU PartsGuide PARTS GUIDE No. S08R9LC46D65E LCD COLOUR TELEVISION LC-46D65E/RU MODELS CONTENTS PRINTED WIRING BOARD CABINET PARTS ASSEMBLIES LCD MODULE Assembly LCD PANEL SUPPLIED ACCESSORIES DUNTKE266FM01 (KEY Unit) PACKING PARTS DUNTKE685FM05 (MAIN Unit) [10] SERVICE JIGS DUNTKE687FM05 (LED Unit) Parts marked with "...
  • Page 82 LC-46D65E/RU PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [1] PRINTED WIRING BOARD ASSEMBLIES KEY Unit DUNTKE266FM01 MAIN Unit DUNTKE685FM05 LED Unit DUNTKE687FM05 POWER Unit (Unit Replacement Item) RDENCA308WJQZ [2] LCD PANEL 46" LCD Panel Module R1LK460D3LW6AY [3] DUNTKE266FM01 (KEY Unit)
  • Page 83 LC-46D65E/RU PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [4] DUNTKE685FM05 (MAIN Unit) C576 Capacitor 1000p 50V Ceramic VCKYCZ1HB102KY C577 Capacitor 1 10V Ceramic VCKYCY1AB105KY C578 Capacitor 56p 50V Ceramic VCCCCZ1HH560JY C579 Capacitor 1 10V Ceramic VCKYCY1AB105KY C580 Capacitor 1000p 50V Ceramic...
  • Page 84 LC-46D65E/RU PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [4] DUNTKE685FM05 (MAIN Unit) C1360 Capacitor 47p 50V Ceramic VCCCCZ1HH470JY C1361 Capacitor 0.47 25V Ceramic VCKYTV1EB474KY C1362 Capacitor 0.1 50V Ceramic VCKYCY1HB104KY C1363 Capacitor 0.22 25V Ceramic VCKYTV1EB224KY C1364 Capacitor 47p 50V Ceramic...
  • Page 85 LC-46D65E/RU PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [4] DUNTKE685FM05 (MAIN Unit) C4410 Capacitor 0.1 16V Ceramic VCKYCZ1CF104ZY C4415 Capacitor 0.1 16V Ceramic VCKYCZ1CF104ZY C4416 Capacitor 0.1 16V Ceramic VCKYCZ1CF104ZY C4420 Capacitor 68 16V Electrolytic VCAAPE1CJ686MY C5301 Capacitor 0.1 16V Ceramic...
  • Page 86 LC-46D65E/RU PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [4] DUNTKE685FM05 (MAIN Unit) C8169 Capacitor 10 10V Ceramic RC-KZA195WJZZY C8170 Capacitor 10 10V Ceramic RC-KZA195WJZZY C8173 Capacitor 0.1 16V Ceramic VCKYCZ1CF104ZY C8175 Capacitor 0.1 16V Ceramic VCKYCZ1CF104ZY C8178 Capacitor 10 10V Ceramic...
  • Page 87 LC-46D65E/RU PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [4] DUNTKE685FM05 (MAIN Unit) C9113 Capacitor 0.1 16V Ceramic VCKYCZ1CF104ZY C9304 Capacitor 0.1 16V Ceramic VCKYCZ1CF104ZY C9606 Capacitor 47 20V Electrolytic VCAAPD1DJ476MY C9607 Capacitor 10 16V Ceramic RC-KZA237WJZZY C9609 Capacitor 4.7 25V Ceramic...
  • Page 88 LC-46D65E/RU PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [4] DUNTKE685FM05 (MAIN Unit) D2006 Zener Diode MAZ8082GML RH-EXA535WJZZY D2401 Diode MAZ9120H VHDMAZ9120H-1Y D2402 Diode MAZ9120H VHDMAZ9120H-1Y D2403 Zener Diode PDZ5.6B,115 RH-EX0259TAZZY D2404 Diode 1PS184,115 VHD1PS184++-1Y D2405 Diode 1PS184,115 VHD1PS184++-1Y D8101...
  • Page 89 LC-46D65E/RU PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [4] DUNTKE685FM05 (MAIN Unit) FB8108 Balun BLN-A188WJ RBLN-A188WJZZY FB8110 Balun BLN-A188WJ RBLN-A188WJZZY FB8111 Balun BLN-A188WJ RBLN-A188WJZZY FB8112 Balun BLN-A207WJ RBLN-A207WJZZY FB8119 Balun BLN-A188WJ RBLN-A188WJZZY FB8121 Balun BLN-A188WJ RBLN-A188WJZZY FB8122 Balun BLN-A188WJ...
  • Page 90 LC-46D65E/RU PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [4] DUNTKE685FM05 (MAIN Unit) J502 Jack QJAKFA061WJZZ J503 Jack OUTPUT QJAKFA061WJZZ J505 Jack QJAKGA079WJZZ J1301 Jack QJAKJ0008GEZZ J1302 Jack Headphone QJAKJ0047CEZZ J8101 Socket 4Pin(USB) QSOCZA172WJQZ L1301 Coil Peaking 22µH RCILPA899WJZZY L1302 Coil Peaking 22µH...
  • Page 91 LC-46D65E/RU PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [4] DUNTKE685FM05 (MAIN Unit) R522 Resistor 1k 1/16W Metal Oxide VRS-CZ1JF102JY R523 Resistor 75 1/4W Metal Oxide VRS-TQ2EF750JY R524 Resistor 75 1/4W Metal Oxide VRS-TQ2EF750JY R525 Resistor 47k 1/16W Metal Oxide...
  • Page 92 LC-46D65E/RU PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [4] DUNTKE685FM05 (MAIN Unit) R1302 Resistor 47 1/16W Metal Oxide VRS-CZ1JF470JY R1303 Resistor 47 1/16W Metal Oxide VRS-CZ1JF470JY R1307 Resistor 47 1/16W Metal Oxide VRS-CZ1JF470JY R1308 Resistor 47 1/16W Metal Oxide...
  • Page 93 LC-46D65E/RU PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [4] DUNTKE685FM05 (MAIN Unit) R1801 Resistor 4.7k 1/16W Metal Oxide VRS-CZ1JF472JY R1817 Resistor 22k 1/16W Metal Oxide VRS-CZ1JF223JY R1819 Resistor 47k 1/16W Metal Oxide VRS-CZ1JF473JY R1820 Resistor 2.2k 1/16W Metal Oxide...
  • Page 94 LC-46D65E/RU PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [4] DUNTKE685FM05 (MAIN Unit) R2612 Resistor 0 1/16W Metal Oxide VRS-CZ1JF000JY R2614 Resistor 0 1/16W Metal Oxide VRS-CZ1JF000JY R2615 Resistor 0 1/16W Metal Oxide VRS-CZ1JF000JY R2616 Resistor 0 1/16W Metal Oxide...
  • Page 95 LC-46D65E/RU PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [4] DUNTKE685FM05 (MAIN Unit) R8133 Resistor 47 1/16W Metal Oxide VRS-CZ1JF470JY R8134 Resistor 47 1/16W Metal Oxide VRS-CZ1JF470JY R8135 Resistor 33 1/16W Metal Oxide VRS-CZ1JF330JY R8136 Resistor 33 1/16W Metal Oxide...
  • Page 96 LC-46D65E/RU PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [4] DUNTKE685FM05 (MAIN Unit) R9304 Resistor 47 1/32W Metal Composition VRK-SB1FF470JY R9305 Resistor 47 1/32W Metal Composition VRK-SB1FF470JY R9306 Resistor 47 1/16W Metal Oxide VRS-CZ1JF470JY R9307 Resistor 47 1/32W Metal Composition...
  • Page 97 LC-46D65E/RU PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [5] DUNTKE687FM05 (LED Unit) C101 Capacitor 0.01 50V Ceramic VCKYCY1HF103ZY C102 Capacitor 10 16V Electrolytic VCEASX1CN106MY C103 Capacitor 100 16V Electrolytic VCEASY1CN107MY C104 Capacitor 2.2 16V Ceramic VCKYTV1CF225ZY D102 Photo Diode CL-165HR/YG-D-T...
  • Page 98 LC-46D65E/RU [6] CABINET PARTS...
  • Page 99 LC-46D65E/RU PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [6] CABINET PARTS Front Cabinet Ass'y CCABAC105WJ04 Front Cabinet Not Available LED Decoration HDECQA992WJ1A HDECSA040WJ1A Shine Trim SP Sheet HPNLSA199WJ1A Spacer, x4 PSPAHB756WJZZ Spacer, x4 PSPAHB856WJZZ Spacer, x2 PSPAKA348WJZZ Rear Cabinet Ass'y...
  • Page 100 LC-46D65E/RU [7] LCD MODULE Assembly...
  • Page 101 LC-46D65E/RU PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [7] LCD MODULE Assembly LCD Module Ass'y R1LK460D3LW6AY Bezel Ass'y Not Available BL Chassis Ass'y CCHSMA492WJ01 LHLDZA963WJKZ Sheet Holder, x4 Lamp, x20 RLMPLA038WJN1 Lamp Holder, x2 LHLDZB235WJKZ Diffusion Plate PCOVUA113WJZZ Diffusion Sheet...
  • Page 102 LC-46D65E/RU [9] PACKING PARTS Not Replacement item...
  • Page 103 LC-46D65E/RU PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [9] PACKING PARTS Packing Case (Main) SPAKCE399WJZZ Packing Case (Bottom) SPAKCE382WJZZ Stand Case SPAKFB583WJZZ SPAKFB584WJZZ Stand Pad Wrapping Paper SPAKPA711WJZZ Mirror Mat Base SPAKPA780WJZZ Mirror Mat Support SPAKPA904WJZZ Buffer Material (Top/Bottom)
  • Page 104 LC-46D65E/RU COPYRIGHT © 2008 BY SHARP CORPORATION ALL RIGHTS RESERVED. No Part of this publication may be reproduced, stored in a retrieval system, or transmitted in any from or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.

This manual is also suitable for:

Lc-42dh77eLc-42dh77ruLc-46dh77ruLc-46dh77sLc-46dh77vLc-42dh77s ... Show all

Table of Contents