Input Resolution Settings; Selecting The Input Resolution - Sharp AQUOS LC-42D85X Operation Manual

Connecting a PC

Input resolution settings

Selecting the input resolution

• Some input signals may have to be registered manually to
display properly.
• The pairs of input signals (resolutions) in the list below are
not distinguishable when received. In such case, you have
to set the correct signal manually. After setting once, it will
display when the same signal (resolution) is input again.
1024 x 768
Press MENU and the MENU screen displays.
1
Press c/d to select "Setup".
2
Press a/b to select "Input Signal" and then
3
press ENTER.
Press a/b to select the desired input signal
4
on the display.
Manually selecting the resoulution of the picture input signal
NOTE
• You can only select the "Input Signal" on the Setup menu
when receiving one of the 2 input signals listed above.
1360 x 768
1024 x 768
1360 x 768
(Example)
59