Harman Stove Company P68 Installation & Operating Manual page 26

P68 Maintenance - Cleaning the Feeder Body
Pellet fines will accumulate in the feeder body over a
period of time; therefore, a yearly inspection and
cleaning of this must be performed.
To clean out fines:
1. Remove right rear cover panel ( see rear cover
installation on page 4 ).
2. Remove wing nut and feeder cover on the right side
of the feeder.
3. Use a vacuum cleaner to remove all fines.
4. Reinstall feed cover, wing nut, and right rear cover
panel.
Feeder Cover
Wing Nut
26
P68 Pellet Stove
5/16" Hex Head
Screws (3 on
each side)
Pellet Fines will build up in this area
Fig. 39
5/16" Hex Head
Screws (3 on
each side)