Child Lock; Channel Search; Automatic Search; Manual Search - Sharp Aquos LC-32WD1E Operation Manual

DTV menu operations

Child Lock

The Child Lock setting allows specific channels to be
blocked from viewing.
• Press YELLOW. An "L" will appear next to the
channel name, indicating that the channel is
locked.
NOTE:
• Press YELLOW again to unlock the channel.
• This setting indicates what channels to block from
access. However, for the Child Lock setting to be
active, you must first set a PIN. See "Child Lock"
on page 25.

Channel Search

Automatic Search

The Automatic Search setting allows you to auto search
for available channels and radio stations, using the pre-
defined frequency channel list for the country or region.
1
Complete steps 1 to 2 in "Channels" on page 23.
2
Press / to select Search, and then press OK.
3
To do an automatic search, press GREEN.
NOTE:
• Completing an Automatic Search will re-set all
modifications previously made.
• Only new channels will be displayed. Already
known channels will be not.
• To change the country or region setting, you must
reset the receiver. See page 25.
• Press YELLOW to enter a specific frequency to
scan.

Manual Search

The Manual Search menu allows you to manually search
for a channel by frequency. (For example, if you want to
search for a specific channel, but do not want to re-set all
of the channels back to their default settings.)
1
Complete steps 1 to 2 in "Edit" on page 23.
2
Press / to select Search, and then press OK.
3
Press YELLOW.
4
Press / to select the channel you want to search
and then press GREEN.

Signal Info

The Signal Info setting provides advanced information
about the signal being received for a service.

Installation

To access the Installation menu:
1
Press DTV MENU.
2
Press / to select Installation, and then press OK.
If you have a PIN set in Child Lock, enter it now using
0–9. See page 25 for information.
• The DTV Installation menu displays.

Language

The Language menu allows you to select the language
preference. If a programme contains multiple language
information, you can set your first and second preferences
for audio and subtitles.
1
Repeat steps 1 - 2 in "Installation" on page 24.
2
Press / to select Language, and then press OK.
3
Press / to select the desired setting, and then
press / to change the setting.
Audio 1 Specifies the first language preference
for the audio.
Audio 2 Specifies the second language
preference for the audio.
Subtitles 1 Specifies the first language preference
for the subtitles.
Subtitles 2 Specifies the second language
preference for the subtitles.
NOTE:
• Additional settings may be available if MHEG
service is available. The options for these settings
depend on the input received from the channel
system.
24