Time Display - Sharp Aquos LC-32WD1E Operation Manual

Useful features
Turning on and off Teletext
1
Select a TV channel or external input source providing
the teletext programme.
2
Press to display the teletext.
3
Press again to change the format of the teletext.
• Each time you press
format as shown below.
TELETEXT
TELETEXT
• If you select a programme with no teletext signal,
a warning displays.

Time display

You can display the time information on the screen
included in the DTV and teletext broadcasts.
1
Select a TV channel that provides teletext information.
(The teletext broadcast must include time information.
The time information is automatically captured.)
2
Press
.
NOTE:
• The time display cannot be stored once the power
is turned off. When you turn on the power, perform
steps 1 to 2 again.
, the screen changes
TELETEXT
Button functions
Buttons Description
Move to the next or previous page.
P ( )
Colour (Red/ Select a group or block of pages
Green/Yellow/ displayed in the coloured brackets at
Blue) the bottom of the screen by pressing
the corresponding Colour (Red/
Green/Yellow/Blue) on the remote
control.
0-9 Directly select any page from 100 to
899 by using 0-9.
Reveal or hide hidden information
such as an answer to a quiz.
(Reveal
Hidden
Teletext)
Stop updating teletext pages
automatically or release the hold
(Freeze/hold)
mode.
Display the subtitle or exit the subtitle
screen.
(Subtitle for
• Subtitles will not be displayed if
Teletext)
the service does not contain the
subtitle information.
Reveal or hide subpages.
• The
(Subpage)
to the previous (available) sub-
page.
• The
to the next (available) subpage.
button is used to navigate
button is used to navigate
21