Harman Stove Company Conquest Gas Stove Installation And Operating Manual page 15

Only For Qualified Installers
5
Reinstall burner module back into the
stove with the four bolts that were
removed. Check gasket for damage
and replace if necessary. Check for
gas leaks when finished.
INSTALLATION
Note: The higher the orifice number the smaller
hole in the tip. For example, a number 52
orifice has a larger hole than a number 60
orifice.
6
Place conversion sticker (provided in Kit) on the valve. This
is to permanently mark the valve that it has been converted
to Natural Gas. This label is important in the event that the
valve is ever removed and mixed in with other valves.
7
Mark the proper box on the
label with a permanent marker.
Note: If no conversion is made,
the box for the propane box must
still be marked by the installer.
9
Verify gas inlet and manifold pressures are within the
specifications on the appliance data plate located inside the
bottom of the unit.
15