Setting The Clock (Remote Control Only) - Sharp XL-E25H Operation Manual

General control (continued)
Remote control operation:
Press the VOLUME (+ or –) button to increase or decrease the volume.
Extra bass control (X-BASS)
When the power is first turned on, the unit will enter the extra bass
mode which emphasises the bass frequencies, and "X-BASS" will
appear. To cancel the extra bass mode, press the X-BASS/DEMO
button on the remote control.
Bass control
1. Press the BASS/TREBLE button to select "BASS".
2. Within 5 seconds, press the VOLUME (+ or –) button to adjust the
bass.
Treble control
1. Press the BASS/TREBLE button to select "TREBLE".
2. Within 5 seconds, press the VOLUME (+ or –) button to adjust the
treble.
Function
When the FUNCTION button on main unit is pressed, the current
function will change to different mode. Press the FUNCTION button
repeatedly to select desired function.
CD TUNER
AUDIO IN
Note:
The backup function will protect the memorised function mode for a
few hours should there be a power failure or the AC power lead
becomes disconnected.
MIN .....
30 MAX
-3 +3
-3 +3
USB

Setting the clock (Remote Control only)

In this example, the clock is set for the 24-hour (0:00) display.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CLOCK/TIMER button.
3
Press the or button to select "TIME ADJ", and press
the MEMORY button.
4
Press the or button to select 24-hour or 12-hour
display and then press the MEMORY button.
"0:00" The 24-hour display will appear.
(0:00 - 23:59)
"AM 12:00"
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
"AM 0:00" The 12-hour display will appear.
(AM 0:00 - PM 11:59)
XL-E25H
ENGLISH
Continued to the next page
E-10