Sharp XL-E25H Operation Manual page 37

4
Within 10 seconds, press the
"ON" or "SET", and press the MEMORY button.
5
Press the or button to adjust the hour and then
press the MEMORY button.
The illustrations show the timer playback setting in the daily
timer mode.
6
Press the or button to adjust the minutes and then
press the MEMORY button.
7
Set the time to finish as in steps 5 and 6 above.
8
or button to select
9
10
Switch input with the or
MEMORY button.
To select the timer playback source: CD or TUNER or USB or
AUDIO IN.
When you select the tuner, select a station by pressing the
or button, and then press the MEMORY button.
If a station has not been programmed, "NO P-SET" will be
displayed and timer setting will be cancelled.
Adjust the volume using the VOLUME control, and then
press the MEMORY button.
Do not turn the volume up too high.
Press the ON/STAND-BY button to enter the power stand
by mode.
The "TIMER" indicator lights up and the unit is ready for timer
playback.
ENGLISH
button, and then press the
MICRO COMPONENT SYSTEM
XL-E25
Continued to the next page
XL-E25H
E-24