Listening To The Radio - Sharp XL-E25H Operation Manual

Listening to the radio

XL-E25H
ENGLISH
Auto power on function:
When you press any of the following buttons, the unit turns on.
TUNER button (remote control): The unit turns on and the
"TUNER" function is activated.
/ or FUNCTION button on the main unit: The unit turns on and
playback of the last function starts (CD,TUNER,USB,AUDIO IN).
E-21
Tuning
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER button on the remote control or
MICRO COMPONENT SYSTEM
XL-E25
FUNCTION button repeatedly on the main unit to select
tuner function.
3
Press the TUNING (
tune in to the desired station.
Manual tuning:
Press the TUNING (
to tune in to the desired station.
Auto tuning:
When the TUNING (
seconds, scanning will start automatically and the tuner will
stop at the first receivable broadcast station.
Notes:
When radio interference occurs, auto scan tuning may stop
automatically at that point.
Auto scan tuning will skip weak signal stations.
To stop the auto tuning, press the TUNING (
To receive FM stereo transmission:
Press the TUNER button to select stereo mode and "ST" indicator
will be displayed.
" " will appear when an FM broadcast is in stereo.
If the FM reception is weak, press the TUNER button to extinguish
the "ST" indicator. The reception changes to monaural, and the
sound becomes clearer.
or ) button on the remote control to
or ) button as many times as required
or ) button is pressed for more than 0.5
or ) button again.
FM stereo mode indicator
FM stereo receiving indicator