Listening To A Cd Or Mp3/Wma Disc; Setting The Clock (Remote Control Only) - Sharp XL-E25H Operation Manual

Setting the clock (Remote Control only)

XL-E25H
(continued)
ENGLISH
5
Press the
press the MEMORY button.
Press the or
Hold it down to advance continuously.
6
Press the or
press the MEMORY button.
Press the or
minute. Hold it down to change the time in 5-minute intervals.
To confirm the time display:
[When the unit is in the stand-by mode]
Press the CLOCK/TIMER button.
The time display will appear for about 10 seconds.
[When the power is on]
Press the CLOCK/TIMER button.
Within 10 seconds, press the
The time display will appear for about 10 seconds.
Note:
The "TIME ADJ" will appear or time will flash to confirm the time
display when the AC power supply is restored after a power failure
or unplugging the unit. If incorrect, readjust the clock as follows.
To readjust the clock:
Perform "Setting the clock" from step 1. If the "TIME ADJ" does not
appear in step 3, step 4 (for selecting the 24-hour or 12-hour
display) will be skipped.
To change the 24-hour or 12-hour display:
1 Clear all the programmed contents. [Refer to "Factory reset,
clearing all memory" on page 29 for details.]
2 Perform "Setting the clock" from step 1 onwards.
E-11
or button to adjust the hour and then
button once to advance the time by 1 hour.
button to adjust the minutes and then
button once to advance the time by 1
or button to display the time.
Listening to a CD or MP3/WMA
disc
This system can play back a standard CD, CD-R/RW in the CD
format and CD-R/RW with MP3 or WMA files, but cannot record on
them. Some audio CD-R and CD-RW discs may not be playable due
to the state of the disc or the device that was used for recording.
MP3:
MP3 is a form of compression. It is an acronym which stands
for MPEG Audio Layer 3.
MP3 is a type of audio code which is processed by significant
compression from the original audio source with very little loss
in sound quality.
This system supports MPEG 1 Layer 3, MPEG 2 Layer 3, and
VBR files.
During VBR file playback, time counter in the display may differ
from its actual playback time.
Bitrate which is supported by MP3 is 32 ~ 320 kbps.
WMA:
WMA files are Advanced System Format files that include audio
files which are compressed with Windows Media Audio codec.
WMA is developed by Microsoft as an audio format file for
Windows Media Player.
"MP3" and "WMA" indicator will light up after the unit reads
information on an MP3 or WMA disc.
Bitrate which is supported by WMA is 64 ~ 160 kbps.
Auto power on function:
When you press any of the following buttons, the unit turns on.
CD button on the remote control: The unit turns on and the "CD"
function is activated.
CD / button on the remote control: The unit turns on and CD
playback starts (regardless of the last function).
FUNCTION button on the main unit: The unit turns on and the last
function is activated (CD,TUNER,USB,AUDIO IN).
/ button on the main unit: The unit turns on and playback of
the last function starts (CD,TUNER,USB,AUDIO IN).
Auto power off function:
In the stop mode of CD, MP3 or WMA operation, the main unit enters
the stand-by mode after 15 minutes of inactivity.