Connecting Antenna Or Cable Without A Box; Recording To A Device From Antenna Or Cable Without A Box; Connecting An Receiver For Tv's Audio Output - Mitsubishi Electric WD-60C9 Basic Owner's Manual
C9 series, 737 series, 837 series high-definition television
Hide thumbs
Also See for WD-60C9:
- Specifications (1 page) ,
- Owner's manual (88 pages) ,
- Service manual (69 pages)
Table of Contents
Advertisement
8
Connecting Devices
Connecting Antenna
or Cable without a Box
Connecting
AN
Receiver
for TV's Audio Output
L
r '
2
:l/1O\,"R.
•
•
•
Required:
1.
Digital audio cable
OR
2.
Analog stereo audio cables
lV Panel
Mitsubishi recommends using coaxial antenna
cable instead of flat twin lead antenna wires for
better performance.
'--__.... 0'='
ANR~
Recording to a Device from
Antenna or Cable without a Box
Required:
1. Two-way RF splitter
2.
Two coaxial cables
3.
Right and left analog audio cables
4.
Composite video cable
Note:
•
If the audio is missing from the digital audio con-
nection, it might be due to the copy-protected
signal. Use the analog audio connection.
•
Check the AN receiver's Owner's Guide for infor-
mation concerning use of the digital input and
switching between digital sound and analog stereo
sound from the TV.
Connecting
AN
Receiver for TV
Video and Audio Output
TV Pane!
Required:
HDMI-to-HDMI cable
Note: This setup allows you to use NetCommand-con-
trolled audio and video switching over the HDMI cable.
3
4
NV receIVer
wrthHDMI
output
AN Device
l
AnY
type
connection
•
2
Hide quick links:
Advertisement
Table of Contents
