Golden Technologies Alante GP201SS Owner's Manual page 28

Alante´ GP201 Manual
THE MAIN CIRCUIT BREAKER
The main circuit breaker is another safety feature incorporated into
your Alante´. This device monitors the amount of current being drawn
from the batteries when the chair is in use. When the motors are heav-
ily strained and too high a current draw is being placed on the
batteries, the main circuit breaker will trip and bring your chair to a
stop. The main circuit breaker reset button is located on the top right
of the shroud.
RESET BUTTON
If the main circuit breaker trips, please wait for approximately 1
minute and then push the reset button to reset the main circuit
breaker. Fig. 28.
NOTE: Usually, the thermal rollback feature is more sensitive than
the main circuit breaker.
power to the chair and wait for five minutes when the chair
suddenly loses speed or power. Doing so will allow the overheated
electrical components
temperatures.
SEAT ROTATION
The seat of your Alante´ can be swiveled to one of five preset positions.
1. Full forward
2. 45 degrees to the right
3. 45 degrees to the left
4. 90 degrees to the right
5. 90 degrees to the left
To swivel the seat:
1. Pull up on the seat rotation lever (see Figure 28) to swivel the seat.
2. Release the lever.
3. The seat will lock in one of the five preset positions.
4. Continue this process until the seat is positioned as you want it.
5.
Seat Rotation Lever
OPERATION Cont.
We recommend that you turn off the
to cool
Figure 28
28
to their normal
Main Circuit
Breaker Reset
Button
Revised 9-14-07
operating