Golden Technologies Alante GP201SS Owner's Manual page 22

Alante´ GP201 Manual
COMFORT SETTINGS Cont.
FOOTREST HEIGHT ADJUSTMENT
1) Remove the shroud
2) Use an Allen
3) Slide the footrest to the desired height.
4) Align the bolt holes in the footrest and the footrest bracket.
5) Install and tighten the bolts.
FOOTREST EXTENDING
1) Lift the rubber pad from the footrest plate.
2) Loosen the two (2) footrest adjustment screws.
3) Slide the footrest plate to the desired position and tighten the
adjustment screws.
NOTE: The maximum extended length is not at the end of the slots.
wrench to remove the bolts indicated in Figure 20.
™
Figure 20
Figure 21
22
Revised 9-14-07