Using The Accessories; Using The Hob - Smeg Oven Instructions For The User

3.3 Using the accessories

Racks and trays
Racks and trays have to be inserted into the
side guides until they come to a complete stop.
• The mechanical safety locks that prevent
the rack from being taken out
accidentally have to face downwards
and towards the oven back.
Gently insert racks and trays into
the oven until they come to a stop.
Clean the trays before using them
for the first time to remove any
residues left by the manufacturing
process.
Oven tray
The oven tray must be inserted in the groove
under the tray rack. In this way fat can be
collected separately from the food which is
being cooked.
Use
Reduction pan stand
The reduction pan stand must be placed on
the hob grids. Make sure they are properly
placed.

3.4 Using the hob

All the appliance's control and monitoring
devices are located together on the front
panel. The burner controlled by each knob
is shown next to the knob. The appliance is
equipped with an electronic ignition device.
Simply press the knob and turn it anti-
clockwise to the maximum flame symbol,
until the burner lights. If the burner does not
light in the first 15 seconds, turn the knob to
and wait 60 seconds before trying
again. After lighting, keep the knob pressed
down for a few seconds to allow the
thermocouple to heat up. The burner may
go out when the knob is released: in this
case, the thermocouple has not heated up
sufficiently. Wait a few moments and repeat
the operation. Keep the knob pressed in
longer.
In case of an accidental switching
off, a safety device will be tripped,
cutting off the gas supply, even if
the gas tap is open. Return the
knob to
seconds before lighting it again.
and wait at least 60
15