Smeg Hob Instructions For The User page 14

Instructions for the installer
Carefully position the supplied insulating seal on the outer perimeter of the hole
made in the counter top as indicated in the figures below, trying to make it stick
on the entire surface by applying light pressure on it with your hands. Depending
on the hob model to be installed, refer to the amounts indicated in the diagram,
bearing in mind that for both models the long front side must be touching the
hole. Fix the hob to the structure using the correct supports A provided.
Carefully trim the surplus away from edge B C beyond the seal. The amounts in
the design below refer to from the hole to the inside of the seal.
The figure to the side shows the exact
holes to be used to correctly attach
the hob to the work surface with
brackets.
IMPORTANT: If the hob is to be installed on top of an oven, ensure that the latter
is equipped with a cooling fan.
16