Combination Switch - Mercedes-Benz S 500 Operator's Manual

Combination Switch

1 Low beam (exterior lamp
switch position
2 High beam (exterior lamp
switch position
3 High beam flasher (high beam
available independent of
exterior lamp switch position)
4 Turn signals, right
5 Turn signals, left
To signal minor directional changes,
such as changing lanes on a highway,
) move combination switch to the point
of resistance only and hold it there.
)
To operate the turn signals
continuously, move the combination
switch past the point of resistance (up
or down). The switch is automatically
canceled when the steering wheel is
turned to a large enough degree.
6 Press switch briefly:
One wipe without washer water
(select only if window is wet)Press
switch past resistance point:
Windshield washer, windshield
wiper; headlamp cleaning system
(only in exterior lamp switch
positions or
only: also in position when the
engine is running)
7 Windshield wiper
0 Wiper off
I Intermittent wiping
II Normal wiper speed
III Fast wiper speed
Note:
The windshield washer reservoir,
hoses and nozzles are automatically
heated.
Canada
57