Mercedes-Benz S 500 Operator's Manual page 110

1 Latch for turn signal, parking, side
marker and standing lamp
assembly
2 Bulb socket for turn signal, parking,
side marker and standing lamp
3 Tab
4 Guide
Turn Signal, Parking, Side
Marker and Standing Lamp
(2357 NA [28.5/8.3 W/30/2.2 cp]
bulb)
Open hood.
Squeeze latch (1) together and lift
complete lamp assembly out to front of
vehicle. Twist bulb socket (2)
counterclockwise and pull out. Push
bulb into socket, turn counterclockwise
and remove.
Insert new bulb in socket, push in and
twist clockwise. Reinstall bulb socket.
Reinstall lamp assembly by sliding
tabs (3) into guides (4) until properly
seated.
Adjusting Headlamp
Correct headlamp adjustment is
extremely important. To check and
readjust a headlamp do the following:
• Park unloaded vehicle on level
surface. Check surface with
carpenter's level.
• Remove cover above
headlamp.
110