Searching For A Poi Directly From The Name Of The Facilities - Pioneer AVIC-F220 Operation Manual

Searching for and selecting a location
2 Touch [POI].
The "POI Search" screen appears.
3 Touch the desired category.
Preset categories
The "POI List" screen appears.
4 Touch the POI you want.
The searched location appears on the map
screen.
= For the subsequent operations, refer to Set-
ting a route to your destination on page 34.
Searching for a POI directly
from the name of the facilities
1 Touch [Home] on the map screen and
then touch [Navigation].
= For details of the operations, refer to Screen
switching overview on page 12.
2 Touch [POI].
The "POI Search" screen appears.
3 Touch [Spell Name].
The "POI Name Input Menu" screen appears.
4 Touch [Zone].
The "Country List" screen appears.
If the location that you want to search for is in
another country, this changes the country set-
ting.
p Once the country has been selected, you
only have to change countries when the lo-
cation that you want to search for is outside
of the country you selected.
5 Touch one of the items on the list to set
the country as search area.
The "POI Name Input Menu" screen returns.
6 Touch [Name].
The "POI Name" screen appears.
7 Enter the POI name and then touch
[OK].
The "POI Name Input Menu" screen returns.
8 Touch [Search].
The "POI List" screen appears.
9 Touch the POI you want.
The searched location appears on the map
screen.
# Touch [Sort].
Each time you touch [Sort] changes the sort
order.
p Current order is indicated on the upper
right of the screen.
!
:
Sorts the items in the list in order by dis-
tance from the vehicle position.
!
:
Sorts the items in the list alphabetically.
= For the subsequent operations, refer to Set-
ting a route to your destination on page 34.
Chapter
06
29
Engb