Searching For A Poi Directly From The Name Of The Facilities - Pioneer AVIC-F160-2 Owner's Manual

Chapter
Searching for and selecting a location
06
8 Touch the POI you want.
The searched location appears on the map
screen.
= For subsequent operations, refer to Setting
a route to your destination on page 37.
Searching for a POI directly
from the name of the facilities
You can search for POIs by their names.
1 Touch [Menu] on the map screen.
The "Navigation Menu" screen appears.
= For details of the operations, refer to Screen
switching overview on page 18.
2 Touch [Find], then [Find Places].
3 Touch [Custom Search].
4 Select the area around which the POIs
should be searched for.
! In a Town:
Searches for a place within a selected city/
town. (The result list will be ordered by the
distance from the centre of the selected
city/town.)
! Around Last Known Position:
Searches around the current position or if it
is not available, around the last known posi-
32
Engb
tion. (The result list will be ordered by the
distance from this position.)
! Around Destination:
Searches for a place around the destination
of the current route. (The result list will be
ordered by the distance from the destina-
tion.)
! Along Route:
Searches along the current route, and not
around a given point. This is useful when
you search for a later stopover that results
in a minimal detour only, such as searching
for upcoming petrol stations or restaurants.
(The result list will be ordered by the length
of the necessary detour.)
p If you have selected [In a Town], select the
city/town to search in.
5 Select one of the main place categories
(e.g. Accommodation) to search in, or
touch [Find by Name] to search among all
places.
6 Select one of the place subcategories
(e.g. Hotel or Motel) to search in, or touch
[Find by Name] to search in the selected
place category.
7 Touch [Find by Name] if you have not
done it before.