Yamaha BR250F Service Manual page 68

1. Check the oil line from the tank to the
pump. It should be free from all obstruc-
tions and shouId not be pinched or
damaged in any way. Replace as neces-
sary.
'~~
Fuel Gauge Line
<,
I
1. Check all lines. If any are cracked,
crimped, or damaged in any way, replace
them.
2. Be sure all lines are secured in place by a
retaining clip.
3. Be su re that all Iines are routed as shown
in the Cable Routing Diagram in the
appendix. The breather pipe must be
routed so that no fuel will leak during
operation.
4. Replace the fuel filter each season.
5. When reinstalling the fuel tank, torque
the four securing bolts to specification.
Tightening torque:
1.0 m-kq ( 7 ft-Ib )