Yamaha BR250F Service Manual page 67

B. Assembly
1. After assembling the ski, thoroughly
grease the wear plate and all retaining
pins.
2. Carefully install the ski onto the ski
column. Tighten the securing bolt until
it is tight, then back it out 1/4 turn.
Tighten the slotted nut, and install a new
cotter pin.
3. When installing the ski shock, secure the
bottom end to the ski then secu re the
5-3. OIL TANK
top end to the ski column. All collars
should be greased, and securing nuts
should be torqued.
Be sure to install the shock with the word
uy AMAHA" facing upward.
Tightening torque:
1.45 m-kg (10.5 ft-lb)
Oil Gauge Line
OilLine~
.......-l.
~~
rf
~
I
iJ
(p/
5-4