Troubleshooting; Replacing The Oven Light - Tecnik HB1TI2T0 User Manual

Table of Contents

Advertisement

Troubleshooting

Problem
The oven does not work.
The clock display flashes.
Replacing the oven
light
Method
Should a malfunction occur, it is often only due to a
minor fault. Please read the following instructions
before calling the after-sales service:
Possible cause
Blown fuse.
Power cut
Repairs may only be carried out by fully trained
after-sales service technicians.
Improper repairs may constitute serious hazards to
the user.
If the oven light fails, it must be replaced.
Heat-resistant spare bulbs can be obtained from the
after-sales service or specialist shops.
Only use these bulbs.
1.
Disconnect the appliance from the mains.
2.
Place a tea towel in the cold oven to prevent
damage.
3.
Unscrew the glass cover by turning it anti-
clockwise.
4.
Replace the oven light with one of the same type.
5.
Screw the glass cover back on.
6.
Remove the tea towel and connect the appliance
from the mains.
Comments/remedy
Look in the fuse box and check that the
fuse is in working order.
Check whether the kitchen light
switches on.
25

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hb2ti2t0Hb2ti5t0Hb2ti5t1

Table of Contents